[PATCH v6 1/3] dt-bindings: i2c: Add Novatek NT72676 I2C controller

From: Ben Huang <[email protected]>

Add Devicetree binding documentation for Novatek NT72676 I2C
controller.

Signed-off-by: Ben Huang <[email protected]>
Signed-off-by: Nina Kuo <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
 .../bindings/i2c/novatek,nt72676-i2c.yaml     | 90 +++++++++++++++++++
 1 file changed, 90 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/novatek,nt72676-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/novatek,nt72676-i2c.yaml b/Documentation/devicetree/bindings/i2c/novatek,nt72676-i2c.yaml
new file mode 100644
index 000000000000..c9dd1c0d7957
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/novatek,nt72676-i2c.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/novatek,nt72676-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Novatek NT72676 I2C Controller
+
+maintainers:
+  - Ben Huang <[email protected]>
+  - Jason JJ Wu <[email protected]>
+
+description:
+  Novatek NT72676 SoC provides two I2C controller variants, generic I2C and
+  STBC I2C.
+  The generic I2C controllers are accessible only by the host CPU and driven
+  by a 96 MHz AHB clock.
+  On the other hand, the STBC I2C controllers can be controlled by either the
+  host CPU or STBC (Standby Controller, an 8051-based microcontroller) and
+  driven by a 12 MHz STBC clock. Authentication with STBC is required before
+  the host CPU can access the STBC I2C controller registers.
+
+properties:
+  compatible:
+    enum:
+      - novatek,nt72676-i2c
+      - novatek,nt72676-stbc-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-frequency:
+    default: 100000
+    enum: [ 100000, 400000 ]
+
+  novatek,stbc-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the STBC system controller registers used to authenticate
+      host access and switch ownership of the STBC I2C controller.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: novatek,nt72676-stbc-i2c
+    then:
+      required:
+        - novatek,stbc-syscon
+    else:
+      properties:
+        novatek,stbc-syscon: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c@fd000000 {
+      compatible = "novatek,nt72676-i2c";
+      reg = <0xfd000000 0x100>;
+      interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+      clock-frequency = <400000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
+
+    i2c@fc040a00 {
+      compatible = "novatek,nt72676-stbc-i2c";
+      reg = <0xfc040a00 0x40>;
+      interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+      novatek,stbc-syscon = <&sysreg_system_controller>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+    };
-- 
2.40.1