[PATCH v4 4/8] arm64: dts: agilex5: add SOCDK eMMC daughter board

The Agilex5 SoCDK eMMC daughter card wires the shared HPS SD6HC to an
8-bit onboard eMMC with fixed 3.3 V VCC and 1.8 V I/O, supporting HS200
and HS400. The board also brings up GMAC0, I2C, I3C, LEDs, UART, and
the SMMU for DMA.

Signed-off-by: Tanmay Kathpalia <[email protected]>
---
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 .../dts/intel/socfpga_agilex5_socdk_emmc.dts  | 127 ++++++++++++++++++
 2 files changed, 128 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts

diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 088a03b89c99..add2b91f5972 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex3_socdk.dtb \
 				socfpga_agilex5_socdk.dtb \
 				socfpga_agilex5_socdk_013b.dtb \
+				socfpga_agilex5_socdk_emmc.dtb \
 				socfpga_agilex5_socdk_modular.dtb \
 				socfpga_agilex5_socdk_nand.dtb \
 				socfpga_agilex7m_socdk.dtb \
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
new file mode 100644
index 000000000000..0ace9f7e0330
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026, Altera Corporation
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 SoCDK eMMC daughter board";
+	compatible = "intel,socfpga-agilex5-socdk-emmc", "intel,socfpga-agilex5";
+
+	aliases {
+		ethernet0 = &gmac0;
+		i3c0 = &i3c0;
+		i3c1 = &i3c1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* Expect the bootloader to fill in the reg */
+		reg = <0x0 0x80000000 0x0 0x0>;
+	};
+
+	vqmmc_io_reg: regulator-fixed-1p8v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vqmmc-io";
+	};
+
+	vmmc_reg: regulator-fixed-3p3v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "vcc-emmc";
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vmmc_reg>;
+	vqmmc-supply = <&vqmmc_io_reg>;
+
+	status = "okay";
+};
+
+&gmac0 {
+	max-frame-size = <9000>;
+	phy-handle = <&emac0_phy0>;
+	phy-mode = "rgmii"; /* TX/RX clock delays provided by Agilex5 I/O hardware */
+
+	status = "okay";
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		emac0_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i3c0 {
+	status = "okay";
+};
+
+&i3c1 {
+	status = "okay";
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&smmu {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog0 {
+	status = "okay";
+};
-- 
2.43.7