[PATCH] ASoC: dt-bindings: tse850: Convert to DT schema

Convert Axentia TSE-850 audio complex from text to DT schema. No
funcational changes.

Signed-off-by: Bhargav Joshi <[email protected]>
---
 .../bindings/sound/axentia,tse850-pcm5142.txt      |  92 ------------------
 .../bindings/sound/axentia,tse850-pcm5142.yaml     | 104 +++++++++++++++++++++
 2 files changed, 104 insertions(+), 92 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
deleted file mode 100644
index b6cc5f6f78c2..000000000000
--- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-Devicetree bindings for the Axentia TSE-850 audio complex
-
-Required properties:
-  - compatible: "axentia,tse850-pcm5142"
-  - axentia,cpu-dai: The phandle of the cpu dai.
-  - axentia,audio-codec: The phandle of the PCM5142 codec.
-  - axentia,add-gpios: gpio specifier that controls the mixer.
-  - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
-  - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
-  - axentia,ana-supply: Regulator that supplies the output amplifier. Must
-    support voltages in the 2V - 20V range, in 1V steps.
-
-The schematics explaining the gpios are as follows:
-
-               loop1 relays
-   IN1 +---o  +------------+  o---+ OUT1
-            \                /
-             +              +
-             |   /          |
-             +--o  +--.     |
-             |  add   |     |
-             |        V     |
-             |      .---.   |
-   DAC +----------->|Sum|---+
-             |      '---'   |
-             |              |
-             +              +
-
-   IN2 +---o--+------------+--o---+ OUT2
-               loop2 relays
-
-The 'loop1' gpio pin controls two relays, which are either in loop position,
-meaning that input and output are directly connected, or they are in mixer
-position, meaning that the signal is passed through the 'Sum' mixer. Similarly
-for 'loop2'.
-
-In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
-(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
-are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
-are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
-the PCM5142 codec.
-
-Example:
-
-	&ssc0 {
-		#sound-dai-cells = <0>;
-
-	};
-
-	&i2c {
-		codec: pcm5142@4c {
-			compatible = "ti,pcm5142";
-
-			reg = <0x4c>;
-
-			AVDD-supply = <&reg_3v3>;
-			DVDD-supply = <&reg_3v3>;
-			CPVDD-supply = <&reg_3v3>;
-
-			clocks = <&sck>;
-
-			pll-in = <3>;
-			pll-out = <6>;
-		};
-	};
-
-	ana: ana-reg {
-		compatible = "pwm-regulator";
-
-		regulator-name = "ANA";
-
-		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
-		pwm-dutycycle-unit = <1000>;
-		pwm-dutycycle-range = <100 1000>;
-
-		regulator-min-microvolt = <2000000>;
-		regulator-max-microvolt = <20000000>;
-		regulator-ramp-delay = <1000>;
-	};
-
-	sound {
-		compatible = "axentia,tse850-pcm5142";
-
-		axentia,cpu-dai = <&ssc0>;
-		axentia,audio-codec = <&codec>;
-
-		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
-		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
-		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
-
-		axentia,ana-supply = <&ana>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml
new file mode 100644
index 000000000000..0ab4b697d28e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/axentia,tse850-pcm5142.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Axentia TSE-850 audio complex
+
+maintainers:
+  - Peter Rosin <[email protected]>
+
+description: |
+  The TSE-850 is an FM Transmitter Station Equipment, designed to generate
+  baseband signals for FM, mainly the DARC subcarrier, but other signals
+  are also possible.
+
+  The schematics explaining the gpios are as follows::
+
+                 loop1 relays
+     IN1 +---o  +------------+  o---+ OUT1
+              \                /
+               +              +
+               |   /          |
+               +--o  +--.     |
+               |  add   |     |
+               |        V     |
+               |      .---.   |
+     DAC +----------->|Sum|---+
+               |      '---'   |
+               |              |
+               +              +
+     IN2 +---o--+------------+--o---+ OUT2
+                 loop2 relays
+
+  The 'loop1' gpio pin controls two relays, which are either in loop
+  position, meaning that input and output are directly connected, or
+  they are in mixer position, meaning that the signal is passed through
+  the 'Sum' mixer. Similarly for 'loop2'.
+
+  In the above, the 'loop1' relays are inactive, thus feeding IN1 to the
+  mixer (if 'add' is active) and feeding the mixer output to OUT1. The
+  'loop2' relays are active, short-cutting the TSE-850 from channel 2.
+  IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name
+  of the (filtered) output from the PCM5142 codec.
+
+properties:
+  compatible:
+    const: axentia,tse850-pcm5142
+
+  axentia,cpu-dai:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the cpu dai.
+
+  axentia,audio-codec:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the PCM5142 codec.
+
+  axentia,add-gpios:
+    maxItems: 1
+    description:
+      gpio specifier that controls the mixer.
+
+  axentia,loop1-gpios:
+    maxItems: 1
+    description:
+      gpio specifier that controls loop relays on channel 1.
+
+  axentia,loop2-gpios:
+    maxItems: 1
+    description:
+      gpio specifier that controls loop relays on channel 2.
+
+  axentia,ana-supply:
+    description:
+      Regulator that supplies the output amplifier. Must support voltages in
+      the 2V - 20V range, in 1V steps.
+
+required:
+  - compatible
+  - axentia,cpu-dai
+  - axentia,audio-codec
+  - axentia,add-gpios
+  - axentia,loop1-gpios
+  - axentia,loop2-gpios
+  - axentia,ana-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/pwm/pwm.h>
+
+    sound {
+        compatible = "axentia,tse850-pcm5142";
+        axentia,cpu-dai = <&ssc0>;
+        axentia,audio-codec = <&codec>;
+        axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+        axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+        axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+        axentia,ana-supply = <&regulator_ana>;
+    };

---
base-commit: 3d6d817622b0a9721e3cc404df3469171582be13
change-id: 20260813-ti-axtensia-59c88b5f0f17

Best regards,
-- 
Bhargav