[PATCH 0/5] Add support for USB phys in IPQ9650

This series
 - Adds dt-bindings and driver changes for the high speed and super speed
   phys in IPQ9650.
 - IPQ9650 specific init tables to QMP super speed phy driver.
 - The Femto high speed phy driver is refactored to accomodate differences
   in the init sequences between SoCs first and then support for IPQ9650 is
   included.

Signed-off-by: Varadarajan Narayanan <[email protected]>
---
Varadarajan Narayanan (5):
      dt-bindings: phy: qcom,qmp-usb: Add IPQ9650 USB3 PHY
      dt-bindings: phy: qcom,usb-snps-femto-v2: Add IPQ9650 compatible
      phy: qcom: qmp-usb: Add IPQ9650 USB3 PHY configuration
      phy: qcom: snps-femto-v2: Move PHY init registers to config tables
      phy: qcom: snps-femto-v2: Add IPQ9650 support

 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        |   2 +
 .../bindings/phy/qcom,usb-snps-femto-v2.yaml       |   4 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 118 +++++++++++++
 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c      | 182 +++++++++++++++------
 4 files changed, 260 insertions(+), 46 deletions(-)
---
base-commit: 862ff50ac20d5e0899a5907ebc5ceee73ed4b099
change-id: 20260820-phy-664ed5ec0292

Best regards,
-- 
Varadarajan Narayanan <[email protected]>