[PATCH 4/5] phy: qcom: snps-femto-v2: Move PHY init registers to config tables
Varadarajan Narayanan <[email protected]>
| Newsgroups | org.kernel.vger.linux-kernel,org.infradead.lists.linux-phy,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
The driver currently programs the common PHY register sequence directly in qcom_snps_hsphy_init(), with the fixed register writes split around the override parameter handling. This makes it hard to support SoCs that need a different sequence or different values. Move the fixed pre- and post-override register programming into per- compatible configuration tables, and keep the 7 nm override parameters in the same match-data structure. This allows the driver to share the common sequence while adding SoC-specific sequences for future platforms such as IPQ9650. Signed-off-by: Varadarajan Narayanan <[email protected]> --- drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 120 ++++++++++++++++---------- 1 file changed, 74 insertions(+), 46 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c index 980ad1fb1e2e..5ffbe1a77dd4 100644 --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -104,6 +104,18 @@ struct phy_override_seq { u8 mask; }; +struct phy_reg_config { + u32 offset; + u32 mask; + u32 val; +}; + +struct phy_config_data { + const struct phy_reg_config *pre; + const struct override_param_map *override; + const struct phy_reg_config *post; +}; + #define NUM_HSPHY_TUNING_PARAMS (9) /** @@ -383,13 +395,42 @@ static const struct override_param_map sc7280_snps_7nm_phy[] = { {}, }; +static const struct phy_reg_config hs_5nm_phy_pre[] = { + { USB2_PHY_USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, UTMI_PHY_CMN_CTRL_OVERRIDE_EN }, + { USB2_PHY_USB_PHY_UTMI_CTRL5, POR, POR }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, FSEL_MASK, 0 }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, PLLBTUNE, PLLBTUNE }, + { USB2_PHY_USB_PHY_REFCLK_CTRL, REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, VBUSVLDEXTSEL0, VBUSVLDEXTSEL0 }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL1, VBUSVLDEXT0, VBUSVLDEXT0 }, + { UINT_MAX, 0, 0 }, +}; + +static const struct phy_reg_config hs_5nm_phy_post[] = { + { USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, VREGBYPASS, VREGBYPASS }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N }, + { USB2_PHY_USB_PHY_UTMI_CTRL0, SLEEPM, SLEEPM }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, SIDDQ, 0 }, + { USB2_PHY_USB_PHY_UTMI_CTRL5, POR, 0 }, + { USB2_PHY_USB_PHY_HS_PHY_CTRL2, USB2_SUSPEND_N_SEL, 0 }, + { USB2_PHY_USB_PHY_CFG0, UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0 }, + { UINT_MAX, 0, 0 }, +}; + static int qcom_snps_hsphy_init(struct phy *phy) { struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + const struct phy_config_data *data; + const struct phy_reg_config *tmp; int ret, i; dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); + data = of_device_get_match_data(hsphy->dev); + if (!data) + return -ENODEV; + ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); if (ret) return ret; @@ -414,24 +455,8 @@ static int qcom_snps_hsphy_init(struct phy *phy) goto disable_clks; } - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, - UTMI_PHY_CMN_CTRL_OVERRIDE_EN, - UTMI_PHY_CMN_CTRL_OVERRIDE_EN); - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, - POR, POR); - qcom_snps_hsphy_write_mask(hsphy->base, - USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, - FSEL_MASK, 0); - qcom_snps_hsphy_write_mask(hsphy->base, - USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, - PLLBTUNE, PLLBTUNE); - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL, - REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); - qcom_snps_hsphy_write_mask(hsphy->base, - USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, - VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, - VBUSVLDEXT0, VBUSVLDEXT0); + for (tmp = data->pre; tmp->offset != UINT_MAX; tmp++) + qcom_snps_hsphy_write_mask(hsphy->base, tmp->offset, tmp->mask, tmp->val); for (i = 0; i < ARRAY_SIZE(hsphy->update_seq_cfg); i++) { if (hsphy->update_seq_cfg[i].need_update) @@ -441,28 +466,8 @@ static int qcom_snps_hsphy_init(struct phy *phy) hsphy->update_seq_cfg[i].value); } - qcom_snps_hsphy_write_mask(hsphy->base, - USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, - VREGBYPASS, VREGBYPASS); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, - USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, - USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0, - SLEEPM, SLEEPM); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, - SIDDQ, 0); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, - POR, 0); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, - USB2_SUSPEND_N_SEL, 0); - - qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, - UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + for (tmp = data->post; tmp->offset != UINT_MAX; tmp++) + qcom_snps_hsphy_write_mask(hsphy->base, tmp->offset, tmp->mask, tmp->val); hsphy->phy_initialized = true; @@ -495,14 +500,34 @@ static const struct phy_ops qcom_snps_hsphy_gen_ops = { .owner = THIS_MODULE, }; +static const struct phy_config_data hs_5nm_phy = { + .pre = hs_5nm_phy_pre, + .post = hs_5nm_phy_post, +}; + +static const struct phy_config_data hs_7nm_phy = { + .pre = hs_5nm_phy_pre, + .override = sc7280_snps_7nm_phy, + .post = hs_5nm_phy_post, +}; + static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { - { .compatible = "qcom,sm8150-usb-hs-phy", }, - { .compatible = "qcom,usb-snps-hs-5nm-phy", }, + { + .compatible = "qcom,sm8150-usb-hs-phy", + .data = &hs_5nm_phy, + }, + { + .compatible = "qcom,usb-snps-hs-5nm-phy", + .data = &hs_5nm_phy, + }, { .compatible = "qcom,usb-snps-hs-7nm-phy", - .data = &sc7280_snps_7nm_phy, + .data = &hs_7nm_phy, + }, + { + .compatible = "qcom,usb-snps-femto-v2-phy", + .data = &hs_5nm_phy, }, - { .compatible = "qcom,usb-snps-femto-v2-phy", }, { } }; MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table); @@ -541,11 +566,14 @@ static void qcom_snps_hsphy_read_override_param_seq(struct device *dev) s32 val; int ret, i; struct qcom_snps_hsphy *hsphy; - const struct override_param_map *cfg = of_device_get_match_data(dev); + const struct phy_config_data *data = of_device_get_match_data(dev); + const struct override_param_map *cfg; - if (!cfg) + if (!data || !data->override) return; + cfg = data->override; + hsphy = dev_get_drvdata(dev); for (i = 0; cfg[i].prop_name != NULL; i++) { -- 2.34.1