[PATCH 0/2] clk: qcom: Add EMAC CNOC APB clocks for Nord SoC

Taniya Das <[email protected]>
Newsgroups org.kernel.vger.linux-kernel,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree
Message-ID <[email protected]>
Add support for the EMAC0 and EMAC1 config NoC (CNOC) APB clocks in the
SE_GCC clock controller on the Qualcomm Nord SoC. These branch clocks
gate the config NoC APB access path to the two EMAC (Ethernet MAC)
controllers and must be enabled for register access to the Ethernet
MACs.

Signed-off-by: Taniya Das <[email protected]>
---
Taniya Das (2):
      dt-bindings: clock: qcom: Add EMAC CNOC APB clocks for Nord
      clk: qcom: segcc-nord: Add EMAC CNOC APB clocks for Nord SoC

 drivers/clk/qcom/segcc-nord.c               | 32 +++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,nord-segcc.h |  2 ++
 2 files changed, 34 insertions(+)
---
base-commit: 7079a12d7506b07fb53b54a664bfad5fa9b16d70
change-id: 20260821-nords_emac_apb_clk-81863e60d066

Best regards,
-- 
Taniya Das <[email protected]>
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.