Re: [PATCH v2 1/3] dt-bindings: leds: nxp,pca963x: add multicolor LED support

On Wed, Jul 01, 2026 at 06:15:51PM +0200, Loic Poulain wrote:
> Add support for grouping individual PCA963x channels into a multicolor
> LED by introducing a multi-led@N node pattern. This follows the
> convention established by other multicolor LED drivers such as
> kinetic,ktd202x.
> 
> This is necessary to support and model hardware setups where multiple
> PWM channels drive a single physical RGB LED.
> 
> Signed-off-by: Loic Poulain <[email protected]>
> ---
>  .../devicetree/bindings/leds/nxp,pca963x.yaml      | 79 ++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
> index 938d0e48fe51bce82779c4457c8e99cb6d80fe70..04b05b8195c18ae9fc1c1cb9d3c694d819ea88e5 100644
> --- a/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
> +++ b/Documentation/devicetree/bindings/leds/nxp,pca963x.yaml
> @@ -74,6 +74,39 @@ patternProperties:
>      required:
>        - reg
>  
> +  "^multi-led@[0-9a-f]+$":
> +    type: object
> +    $ref: leds-class-multicolor.yaml#
> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        minimum: 0

Some valid looking stuff from Sashiko here.
On this, was this meant to be minItems?

pw-bot: changes-requested

Thanks,
Conor.

> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      "^led@[0-9a-f]+$":
> +        type: object
> +        $ref: common.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          reg:
> +            minimum: 0
> +
> +        required:
> +          - reg
> +
> +    required:
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"
> +
>  allOf:
>    - if:
>        properties:
> @@ -137,4 +170,50 @@ examples:
>          };
>      };
>  
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        led-controller@62 {
> +            compatible = "nxp,pca9633";
> +            reg = <0x62>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            /* Three channels controlling one RGB LED */
> +            multi-led@0 {
> +                    reg = <0>;
> +                    color = <LED_COLOR_ID_RGB>;
> +                    function = LED_FUNCTION_STATUS;
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +
> +                    led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_RED>;
> +                    };
> +
> +                    led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_GREEN>;
> +                    };
> +
> +                    led@2 {
> +                            reg = <2>;
> +                            color = <LED_COLOR_ID_BLUE>;
> +                    };
> +            };
> +
> +            /* Remaining channel used as a plain white LED */
> +            led@3 {
> +                    reg = <3>;
> +                    color = <LED_COLOR_ID_WHITE>;
> +                    function = LED_FUNCTION_STATUS;
> +            };
> +        };
> +    };
> +
>  ...
> 
> -- 
> 2.34.1
>

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCakVHJwAKCRB4tDGHoIJi
0s1mAQDqox5Ow4/RT0Vy/4ZAZkraI5VibF8pZooYyuWMCI8piAEAiTdOpmHGFG4C
xBX1Hl95digAHCC1eq4ZNLJFr/cB6gc=
=OgnZ
-----END PGP SIGNATURE-----