Re: [PATCH v4] leds: rgb: leds-qcom-lpg: Fix LED color balancing in HW pattern mode

On 6/30/26 5:25 AM, Fenglin Wu wrote:
> Currently, when the LED is configured as a RGB LED or a multi-color
> LED device, the same pattern is programmed for all LED channels
> regardless of the sub-led intensities when triggered by HW pattern.
> It results that the LED device is always working in a white-balanced
> mode regardless of the intensity settings.
>
> To fix this, scale the pattern data according to the sub-led intensity
> and program the HW pattern separately for each LPG channel.
>
> Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
> Fixes: 6ab1f766a80a ("leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM")
> Fixes: 5e9ff626861a ("leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM")
> Assisted-by: Claude:claude-4-6-sonnet
> Signed-off-by: Fenglin Wu <[email protected]>
> ---

[...]

> +	prep->data = pattern;


the robot pointed out to me that this must be = no_free_ptr(pattern)
to prevent it being cleaned up

Konrad

> +	prep->len = actual_len;
> +	prep->delta_t = delta_t;
> +	prep->ping_pong = ping_pong;
>  
> -	mutex_lock(&lpg->lock);
> +	return 0;
> +}