[PATCH v5 4/4] arm64: dts: monaco-arduino-monza: microcontroller LEDs
Loic Poulain <[email protected]>
| Newsgroups | org.kernel.vger.linux-leds,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Onboard MCU/STM32 implements a led controller compatible with PCA9635. There are four RGB LEDs controlled via channels 0-2, 3-5, 6-8 and 9-11. Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Loic Poulain <[email protected]> --- arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts | 110 ++++++++++++++++++++++ 1 file changed, 110 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts index 379b796f261f4c8f6b7712c5d340b20be1b9217c..83ccc4eec342328c78be37d4642b772d74a8ed37 100644 --- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts +++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "monaco.dtsi" @@ -156,6 +157,115 @@ vreg_nvme: regulator-3p3-m2 { }; }; +&cci1 { + status = "okay"; +}; + +&cci1_i2c1 { + led-controller@22 { + compatible = "nxp,pca9635"; + reg = <0x22>; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + label = "stm-led-1"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led@1 { + reg = <1>; + label = "stm-led-2"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + #address-cells = <1>; + #size-cells = <0>; + + led@3 { + reg = <3>; + color = <LED_COLOR_ID_RED>; + }; + + led@4 { + reg = <4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + reg = <5>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led@2 { + reg = <2>; + label = "stm-led-3"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + #address-cells = <1>; + #size-cells = <0>; + + led@6 { + reg = <6>; + color = <LED_COLOR_ID_RED>; + }; + + led@7 { + reg = <7>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@8 { + reg = <8>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi-led@3 { + reg = <3>; + label = "stm-led-4"; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STATUS; + #address-cells = <1>; + #size-cells = <0>; + + led@9 { + reg = <9>; + color = <LED_COLOR_ID_RED>; + }; + + led@a { + reg = <10>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@b { + reg = <11>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + }; +}; + ðernet0 { phy-mode = "2500base-x"; phy-handle = <&hsgmii_phy0>; -- 2.34.1