[PATCH 2/6] [v6] Input: gpio-keys: make legacy gpiolib optional

Arnd Bergmann <[email protected]>
Newsgroups org.kernel.vger.linux-leds,org.kernel.vger.linux-gpio,org.kernel.vger.linux-input,org.kernel.vger.linux-kernel,org.kernel.vger.linux-sh
Message-ID <[email protected]>
From: Arnd Bergmann <[email protected]>

Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.

Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.

The two Rohm PMIC drivers use a gpio-keys device without an actual GPIO,
passing an IRQ number instead. In order to keep this working both with
and with CONFIG_GPIOLIB_LEGACY, change the gpio-keys driver to ignore
the gpio number if an IRQ is passed.

Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Acked-by: Bartosz Golaszewski <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]> # for input
Signed-off-by: Arnd Bergmann <[email protected]>
---
v3..v5: resend
    v2: skip the fake GPIO number passing from mfd

This patch now has a small conflict with the rework of the rohm drivers
to use software nodes. That patch is the one we want, and then
the drivers/mfd changes here can get dropped, but the two need to
get merged in the correct order.
---
 drivers/input/keyboard/gpio_keys.c        | 9 +++++----
 drivers/input/keyboard/gpio_keys_polled.c | 4 +++-
 drivers/mfd/rohm-bd71828.c                | 1 -
 drivers/mfd/rohm-bd718x7.c                | 1 -
 include/linux/gpio_keys.h                 | 2 ++
 5 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index e19617485679..e988657f97cb 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -23,8 +23,8 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/legacy.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/spinlock.h>
@@ -528,7 +528,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			 */
 			bdata->gpiod = NULL;
 		}
-	} else if (gpio_is_valid(button->gpio)) {
+#ifdef CONFIG_GPIOLIB_LEGACY
+	} else if (!button->irq && gpio_is_valid(button->gpio)) {
 		/*
 		 * Legacy GPIO number, so request the GPIO here and
 		 * convert it to descriptor.
@@ -546,6 +547,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 
 		if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
 			gpiod_toggle_active_low(bdata->gpiod);
+#endif
 	}
 
 	if (bdata->gpiod) {
@@ -583,8 +585,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev,
 			if (irq < 0) {
 				error = irq;
 				dev_err_probe(dev, error,
-					      "Unable to get irq number for GPIO %d\n",
-					      button->gpio);
+					      "Unable to get irq number for GPIO\n");
 				return error;
 			}
 			bdata->irq = irq;
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index e6707d72210e..4e7a366ff05b 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -18,8 +18,8 @@
 #include <linux/input.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
+#include <linux/gpio/legacy.h>
 #include <linux/gpio_keys.h>
 #include <linux/property.h>
 
@@ -301,6 +301,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 				return dev_err_probe(dev, PTR_ERR(bdata->gpiod),
 						     "failed to get gpio\n");
 			}
+#ifdef CONFIG_GPIOLIB_LEGACY
 		} else if (gpio_is_valid(button->gpio)) {
 			/*
 			 * Legacy GPIO number so request the GPIO here and
@@ -323,6 +324,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 			if (button->active_low ^ gpiod_is_active_low(bdata->gpiod))
 				gpiod_toggle_active_low(bdata->gpiod);
+#endif
 		}
 
 		bdata->last_state = -1;
diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c
index a79f354bf5cb..df6dad762ec9 100644
--- a/drivers/mfd/rohm-bd71828.c
+++ b/drivers/mfd/rohm-bd71828.c
@@ -39,7 +39,6 @@
 
 static struct gpio_keys_button button = {
 	.code = KEY_POWER,
-	.gpio = -1,
 	.type = EV_KEY,
 	.wakeup = 1,
 };
diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c
index ff714fd4f54d..dd774aa8828b 100644
--- a/drivers/mfd/rohm-bd718x7.c
+++ b/drivers/mfd/rohm-bd718x7.c
@@ -20,7 +20,6 @@
 
 static struct gpio_keys_button button = {
 	.code = KEY_POWER,
-	.gpio = -1,
 	.type = EV_KEY,
 };
 
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index 80fa930b04c6..e8d6dc290efb 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -25,7 +25,9 @@ struct device;
  */
 struct gpio_keys_button {
 	unsigned int code;
+#ifdef CONFIG_GPIOLIB_LEGACY
 	int gpio;
+#endif
 	int active_low;
 	const char *desc;
 	unsigned int type;
-- 
2.39.5
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.