[PATCH v4] dt-bindings: leds: Add default-intensity property

Document the default-intensity property to set a default color on
multicolor LEDs.

Update pwm-multicolor to support it and update the example to turn the
LED red on boot.

Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Jonas Rebmann <[email protected]>
---
Changes in v4:
- Move default to leds-pwm-multicolor.yaml as other drivers have other
  defaults (Thanks, Conor)
- Move definition of default-intensity property next to default-brightness
- Slighly improve description
- Link to v3: https://patch.msgid.link/[email protected]

Changes in v3:
- make default-intensity property description more generic and less
  redundant (Thanks, Conor)
- Drop applied patch that introduces the property (Thanks, Lee)
- Link to v2: https://patch.msgid.link/[email protected]

Changes in v2:
- dt-bindings: Use correct property name in example
- dt-bindings: Add missing word in property description
- Link to v1: https://patch.msgid.link/[email protected]
---
 Documentation/devicetree/bindings/leds/common.yaml              | 9 +++++++++
 Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml | 5 +++++
 2 files changed, 14 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index f4e44b33f56d..3e6f913070b0 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -179,6 +179,15 @@ properties:
       initialization. If the option is not set then max brightness is used.
     $ref: /schemas/types.yaml#/definitions/uint32
 
+  default-intensity:
+    description:
+      The initial intensity of the LED color component. As the intensity of
+      each sub-LED is multiplied by the overall brightness, without this
+      property on a sub-LED, it may effectively be initialized at a brightness
+      of 0 regardless of its linux,default-trigger and default-brightness
+      properties.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
   panic-indicator:
     description:
       This property specifies that the LED should be used, if at all possible,
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index a31a202afe5c..08e28c5f08a8 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -45,6 +45,9 @@ properties:
 
           color: true
 
+          default-intensity:
+            default: 0
+
         required:
           - pwms
           - color
@@ -63,12 +66,14 @@ examples:
 
         multi-led {
             color = <LED_COLOR_ID_RGB>;
+            linux,default-trigger = "default-on";
             function = LED_FUNCTION_INDICATOR;
             max-brightness = <65535>;
 
             led-red {
                 pwms = <&pwm1 0 1000000>;
                 color = <LED_COLOR_ID_RED>;
+                default-intensity = <65535>;
             };
 
             led-green {

---
base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260604-multicolor-default-11e3becde05a

Best regards,
--  
Jonas Rebmann <[email protected]>