Re: [PATCH v7 2/4] dt-bindings: leds: nxp,pca963x: add multicolor LED support
Krzysztof Kozlowski <[email protected]> Mon, 27 Jul 2026 08:22:05 +0200
| Newsgroups | org.kernel.vger.linux-leds,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <20260727-mellow-iguana-of-drizzle-ebcced@quoll> |
On Fri, Jul 24, 2026 at 09:48:16AM +0200, Loic Poulain wrote:
> then:
> patternProperties:
> - "^led@[0-9a-f]+$":
> + "^.*led@[0-9a-f]$":
> properties:
> reg:
> maximum: 3
> + "^multi-led@[0-9a-f]$":
> + patternProperties:
> + "^led@[0-9a-f]$":
> + properties:
> + reg:
> + maximum: 3
> - if:
> properties:
> compatible:
> @@ -96,10 +136,16 @@ allOf:
> - nxp,pca9634
> then:
> patternProperties:
> - "^led@[0-9a-f]+$":
> + "^.*led@[0-9a-f]$":
Why changing this? multi-led is below, so maybe you wanted to combine
both?
> properties:
> reg:
> maximum: 7
> + "^multi-led@[0-9a-f]$":
> + patternProperties:
> + "^led@[0-9a-f]$":
> + properties:
> + reg:
> + maximum: 7
>
> additionalProperties: false
>
> @@ -143,4 +189,50 @@ examples:
> };
> };
>
> + - |
> + #include <dt-bindings/leds/common.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led-controller@62 {
> + compatible = "nxp,pca9633";
> + reg = <0x62>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Three channels controlling one RGB LED */
> + multi-led@0 {
> + reg = <0>;
Messed indentation.
> + color = <LED_COLOR_ID_RGB>;
> + function = LED_FUNCTION_STATUS;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@0 {
> + reg = <0>;
> + color = <LED_COLOR_ID_RED>;
> + };
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_GREEN>;
> + };
> +
> + led@2 {
> + reg = <2>;
> + color = <LED_COLOR_ID_BLUE>;
> + };
> + };
> +
> + /* Remaining channel used as a plain white LED */
> + led@3 {
> + reg = <3>;
> + color = <LED_COLOR_ID_WHITE>;
> + function = LED_FUNCTION_STATUS;
> + };
> + };
> + };
> +
> ...
>
> --
> 2.34.1
>