Re: [PATCH net-next v5 6/7] ptp: ocp: Add R4006 I2C peripheral topology

[email protected]
Newsgroups org.kernel.vger.linux-leds,org.kernel.vger.linux-devicetree
Message-ID <[email protected]> 
> R4006 boards place sensors and an IS32FL3207 LED controller behind
> a four-channel PCA9546 mux.
> 
> Describe the LM75B, SHT3x, and ICP10100 sensors and the five RGB LED
> groups. The BNO08x at address 0x4a is omitted because it has no upstream
> driver; the LM75B using the same address is on a different mux channel.
> 
> Read the board ID independently of the serial EEPROM and select this
> profile from the R4006 prefix. Production IDs may append a board revision,
> while unknown board IDs remain untouched.
> 
> Signed-off-by: Ahmad Byagowi <[email protected]>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=6
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.