Re: [PATCH net-next v5 7/7] ptp: ocp: Add Time Card V9 I2C peripheral topology
| Newsgroups | org.kernel.vger.linux-leds,org.kernel.vger.linux-devicetree |
|---|---|
| Message-ID | <[email protected]> |
> Time Card V9 boards use the same mux infrastructure with a BME280, > a BNO055, and an IS32FL3207 at a different address. > > Describe six RGB groups. The first two expose the GNSS1 and GNSS2 > status LEDs on outputs 0 through 5; the remaining four expose the SMA > indicator LEDs on outputs 6 through 17. > > Select the profile only when the fixed-width board ID exactly matches > TIMECARD-V9 with zero or erased-byte padding. Older revisions share the > detectable I2C devices but not the V9 LED wiring. > > Signed-off-by: Ahmad Byagowi <[email protected]> Sashiko has reviewed this patch and found no issues. It looks great! -- Sashiko AI review · https://sashiko.dev/#/patchset/[email protected]?part=7