[PATCHv2 0/4] m68k: coldfire: fix non-standard readX()/writeX() functions
Greg Ungerer <[email protected]>
| Newsgroups | org.kernel.vger.linux-m68k,dev.linux.lists.imx,org.kernel.vger.linux-can,org.kernel.vger.linux-kernel,org.kernel.vger.linux-mmc,org.kernel.vger.linux-spi,org.kernel.vger.netdev |
|---|---|
| Message-ID | <[email protected]> |
This odd collection of patches is aimed at fixing the non-standard ColdFire set of readX()/writeX() IO access functions. Instead switching to using the asm-generic definitions in include/asm-generic/io.h. The difficulty comes in trying not to break any drivers with this change. The implementation of the readX()/writeX() family of IO access functions is non-standard on ColdFire platforms. They either return big-endian (that is native endian) data, or on platforms with PCI bus support check the supplied address and return either big or little endian data based on that check. This is non-standard, they are expected to always return little-endian byte ordered data. Unfortunately this behavior also means that ioreadX()/iowroteX() and their big-endian counter parts ioreadXbe()/iowriteXbe() are currently broken because they are implemented using the readX()/writeX() functions. Patches 1, 2 and 3 in this series are specific driver changes that can be made independently of the final ColdFire readX()/writeX() change. Patch 4 is the actual switch to ColdFire building using asm-generic readX()/writeX(), but also contains three driver fixes that are not easily handled independently. Note that I don't have access to all supported hardware needed to fully test all these changes. I have tested what I have, a bunch of the standard Freescale ColdFire eval boards, and inspected generated code for differences. Note also that patch 3 relies on changes that are currently only in linux-next, and are scheduled to hit mainline during the next v7.2 merge window. Those changes are also available in an immutable git tree at git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git cf-internal-io branch. This v2 series moves from an RFC to a patch series. There is only minor changes overall to address comments. Changes include formatting, separating out the mcf5441x regmap in spi-fsl-dspi.c (patch 4) and reordering the quirks in flexcan-core.c (patch 4). Signed-off-by: Greg Ungerer <[email protected]> --- arch/m68k/include/asm/io_no.h | 68 ------- drivers/dma/mcf-edma-main.c | 14 - drivers/mmc/host/sdhci-esdhc-mcf.c | 24 +- drivers/net/can/flexcan/flexcan-core.c | 1 drivers/net/ethernet/freescale/fec.h | 15 + drivers/net/ethernet/freescale/fec_main.c | 257 +++++++++++++++--------------- drivers/net/ethernet/freescale/fec_ptp.c | 78 ++++----- drivers/net/ethernet/smsc/smc91x.h | 12 - drivers/spi/spi-fsl-dspi.c | 14 + 9 files changed, 230 insertions(+), 253 deletions(-)