Re: [PATCHv2 3/4] mmc: sdhci-esdhc-mcf: do not use readl()/writel() on ColdFire

Hi Greg,

the driver behaves as before, and it is not using "edma",
but his internal dma interface, no new issues are introduced.

Over testing btw i noticed a possible issue, totally unrelated
with your changes. Will fix it eventually.

Tested-by: Angelo Dureghello <[email protected]>
Acked-by: Angelo Dureghello <[email protected]>

On Wed, Jun 10, 2026 at 12:13:00AM +1000, Greg Ungerer wrote:
> The implementation of the readX() and writeX() family of IO access
> functions is non-standard on ColdFire platforms. They check the supplied
> IO address and will return either big or little endian results based on
> that check. This is non-standard, they are expected to always return
> little-endian byte ordered data. Unfortunately this behavior also means
> that ioreadX()/iowroteX() and their big-endian counter parts
> ioreadXbe()/iowriteXbe() are wrong. This is now in the process of being
> cleaned up and fixed.
>
> Change the use of the readX() and writeX() access functions in this driver
> to use the recently defined specific ColdFire internal SoC hardware IO
> access functions mcf_read8()/mcf_read16()/mcf_read32() and
> mcf_write8()/mcf_write16()/mcf_write32().
>
> There is no functional change to the driver. Though it does have the
> effect of making the IO access slightly more efficient, since there is
> no longer a need to do the address check at every register access.
>
> Acked-by: Angelo Dureghello <[email protected]>
> Tested-by: Angelo Dureghello <[email protected]>
> Signed-off-by: Greg Ungerer <[email protected]>
> ---
> v2: moved from RFC to PATCH
>
>  drivers/mmc/host/sdhci-esdhc-mcf.c | 24 ++++++++++++------------
>  1 file changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-esdhc-mcf.c b/drivers/mmc/host/sdhci-esdhc-mcf.c
> index 375fce5639d7..6853521e8b2c 100644
> --- a/drivers/mmc/host/sdhci-esdhc-mcf.c
> +++ b/drivers/mmc/host/sdhci-esdhc-mcf.c
> @@ -55,7 +55,7 @@ static inline void esdhc_clrset_be(struct sdhci_host *host,
>  	if (reg == SDHCI_HOST_CONTROL)
>  		val |= ESDHC_PROCTL_D3CD;
>
> -	writel((readl(base) & ~mask) | val, base);
> +	mcf_write32((mcf_read32(base) & ~mask) | val, base);
>  }
>
>  /*
> @@ -71,7 +71,7 @@ static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg)
>  	if (reg == SDHCI_HOST_CONTROL) {
>  		u32 host_ctrl = ESDHC_DEFAULT_HOST_CONTROL;
>  		u8 dma_bits = (val & SDHCI_CTRL_DMA_MASK) >> 3;
> -		u8 tmp = readb(host->ioaddr + SDHCI_HOST_CONTROL + 1);
> +		u8 tmp = mcf_read8(host->ioaddr + SDHCI_HOST_CONTROL + 1);
>
>  		tmp &= ~0x03;
>  		tmp |= dma_bits;
> @@ -82,12 +82,12 @@ static void esdhc_mcf_writeb_be(struct sdhci_host *host, u8 val, int reg)
>  		 */
>  		host_ctrl |= val;
>  		host_ctrl |= (dma_bits << 8);
> -		writel(host_ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
> +		mcf_write32(host_ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
>
>  		return;
>  	}
>
> -	writel((readl(base) & mask) | (val << shift), base);
> +	mcf_write32((mcf_read32(base) & mask) | (val << shift), base);
>  }
>
>  static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg)
> @@ -110,24 +110,24 @@ static void esdhc_mcf_writew_be(struct sdhci_host *host, u16 val, int reg)
>  		 * As for the fsl driver,
>  		 * we have to set the mode in a single write here.
>  		 */
> -		writel(val << 16 | mcf_data->aside,
> +		mcf_write32(val << 16 | mcf_data->aside,
>  		       host->ioaddr + SDHCI_TRANSFER_MODE);
>  		return;
>  	}
>
> -	writel((readl(base) & mask) | (val << shift), base);
> +	mcf_write32((mcf_read32(base) & mask) | (val << shift), base);
>  }
>
>  static void esdhc_mcf_writel_be(struct sdhci_host *host, u32 val, int reg)
>  {
> -	writel(val, host->ioaddr + reg);
> +	mcf_write32(val, host->ioaddr + reg);
>  }
>
>  static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg)
>  {
>  	if (reg == SDHCI_HOST_CONTROL) {
>  		u8 __iomem *base = host->ioaddr + (reg & ~3);
> -		u16 val = readw(base + 2);
> +		u16 val = mcf_read16(base + 2);
>  		u8 dma_bits = (val >> 5) & SDHCI_CTRL_DMA_MASK;
>  		u8 host_ctrl = val & 0xff;
>
> @@ -137,7 +137,7 @@ static u8 esdhc_mcf_readb_be(struct sdhci_host *host, int reg)
>  		return host_ctrl;
>  	}
>
> -	return readb(host->ioaddr + (reg ^ 0x3));
> +	return mcf_read8(host->ioaddr + (reg ^ 0x3));
>  }
>
>  static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg)
> @@ -149,14 +149,14 @@ static u16 esdhc_mcf_readw_be(struct sdhci_host *host, int reg)
>  	if (reg == SDHCI_HOST_VERSION)
>  		reg -= 2;
>
> -	return readw(host->ioaddr + (reg ^ 0x2));
> +	return mcf_read16(host->ioaddr + (reg ^ 0x2));
>  }
>
>  static u32 esdhc_mcf_readl_be(struct sdhci_host *host, int reg)
>  {
>  	u32 val;
>
> -	val = readl(host->ioaddr + reg);
> +	val = mcf_read32(host->ioaddr + reg);
>
>  	/*
>  	 * RM (25.3.9) sd pin clock must never exceed 25Mhz.
> @@ -245,7 +245,7 @@ static void esdhc_mcf_pltfm_set_clock(struct sdhci_host *host,
>  	 * fvco = fsys * outdvi1 + 1
>  	 * fshdc = fvco / outdiv3 + 1
>  	 */
> -	temp = readl(pll_dr);
> +	temp = mcf_read32(pll_dr);
>  	fsys = pltfm_host->clock;
>  	fvco = fsys * ((temp & 0x1f) + 1);
>  	fesdhc = fvco / (((temp >> 10) & 0x1f) + 1);
> --
> 2.54.0
>