[PATCH v5 05/15] media: redrat3: Error path leaves device in transmitting state

In the allocation failure error path, the transmitting boolean is not
cleared. If this error path is followed the transmitter cannot be
used again until the device is replugged or the module reloaded.

Fix the error path by moving the assignment statement.

Remove the check for the transmitting state in transmit, since rc-core
ensures there is never a reentrant call to the driver transmit function;
the transmit function is always called with dev->lock held.

The transmitting boolean is only used for interpretting firmware errors.

Fixes: fac59136bc22 ("[media] RedRat3: Return directly after a failed kcalloc() in redrat3_transmit_ir()")"
Signed-off-by: Sean Young <[email protected]>
Cc: [email protected]
---
 drivers/media/rc/redrat3.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/drivers/media/rc/redrat3.c b/drivers/media/rc/redrat3.c
index 994d4864520c..602b84dd628d 100644
--- a/drivers/media/rc/redrat3.c
+++ b/drivers/media/rc/redrat3.c
@@ -773,17 +773,9 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
 	u8 curlencheck = 0;
 	unsigned i, sendbuf_len;
 
-	if (rr3->transmitting) {
-		dev_warn(dev, "%s: transmitter already in use\n", __func__);
-		return -EAGAIN;
-	}
-
 	if (count > RR3_MAX_SIG_SIZE - RR3_TX_TRAILER_LEN)
 		return -EINVAL;
 
-	/* rr3 will disable rc detector on transmit */
-	rr3->transmitting = true;
-
 	sample_lens = kzalloc_objs(*sample_lens, RR3_DRIVER_MAXLENS);
 	if (!sample_lens)
 		return -ENOMEM;
@@ -794,6 +786,9 @@ static int redrat3_transmit_ir(struct rc_dev *rcdev, unsigned *txbuf,
 		goto out;
 	}
 
+	/* rr3 will disable rc detector on transmit */
+	rr3->transmitting = true;
+
 	for (i = 0; i < count; i++) {
 		cur_sample_len = redrat3_us_to_len(txbuf[i]);
 		if (cur_sample_len > 0xffff) {
-- 
2.55.0