Re: [PATCH 1/2] drivers: media: i2c: s5kjn1: Add support for 19.2MHz MCLK

Neko <[email protected]> Sat, 1 Aug 2026 17:39:39 +0300

Newsgroups	org.kernel.vger.linux-media,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID	<[email protected]>

On 8/1/26 5:31 PM, Danila Tikhonov wrote:
> The S5KJN1 sensor supports a range of external clock frequencies (MCLK),
> while the driver currently only supports a 24MHz MCLK.
>
> The 19.2MHz clock is used by the S5KJN1 camera sensor on the
> Nothing Phone (1) aka sm7325-nothing-spacewar.
>
> Add support for this frequency.
>
> While splitting the clock settings into separate register sequences,
> add definitions for the known clock-related registers and values instead
> of using raw register addresses and magic values.

Tested-by: Vasiliy Doylov <[email protected]>