Re: [PATCH v8 2/3] arm64: dts: qcom: kodiak: enable inline crypto engine for SDHC

On 6/30/26 12:23 PM, Kuldeep Singh wrote:
>> qcom_ice_probe()
>>   -> qcom_ice_create()
>>     -> devm_clk_get_optional_enabled()
>>
>> If we remove the _enabled suffix and put a ice_resume() in ice_get(),
>> I believe this is no longer an issue
> 
> I see your point.
> devm_clk_get_optional_enabled turns clocks on, whereas using
> devm_clk_get_optioanl will only get handle but don't enable clock.
> Please note, clocks are needed at probe to read ice hw version 

Right, but we don't need them afterwards in the probe function. We
can simply gate them. There's a parallel effort to enable runtime PM
in the driver:

https://lore.kernel.org/linux-arm-msm/[email protected]/

and with that all you'd need after getting the clock is a
pm_runtime_resume_and_get() before the version check, followed by a
pm_runtime_put() right after it


> and then
> later ufs/sdhc fetch ice instance using of_qcom_ice_get() and control
> suspend/resume path.
> 
> But my idea is, if storage itself isn't there(like sdhc on
> qcs6490-rb3gen2) then why sdhc-ice should even probe and check hardware
> version? as there's no significance in even probing ice.

On the developer/customer experience side, would you expect having to
manually enable what's essentially a sub-feature of the storage media
on every single board?

Konrad