Re: [PATCH V2 2/2] arm64: dts: qcom: Enable SD card for Shikra EVK

Konrad Dybcio <[email protected]>
Newsgroups org.kernel.vger.linux-mmc,org.infradead.lists.linux-phy,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
On 6/30/26 6:57 PM, Monish Chunara wrote:
> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
> vmmc/vqmmc regulators and gpio-based card detection for each board
> variant.
> 
> Signed-off-by: Monish Chunara <[email protected]>
> ---
>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 18 ++++++++++++++++++
>  arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 18 ++++++++++++++++++
>  arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 18 ++++++++++++++++++

Move the commonalities to evk.dtsi and only override regulator
in the board files, please

Konrad
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.