Re: [PATCH V2 2/2] arm64: dts: qcom: Enable SD card for Shikra EVK

Monish Chunara <[email protected]>
Newsgroups org.kernel.vger.linux-mmc,org.infradead.lists.linux-phy,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>

On 7/1/2026 5:08 PM, Konrad Dybcio wrote:
> On 6/30/26 6:57 PM, Monish Chunara wrote:
>> Enable SD card for Shikra CQS, CQM and IQS EVK variants. Configure the
>> vmmc/vqmmc regulators and gpio-based card detection for each board
>> variant.
>>
>> Signed-off-by: Monish Chunara <[email protected]>
>> ---
>>  arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 18 ++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 18 ++++++++++++++++++
>>  arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 18 ++++++++++++++++++
> 
> Move the commonalities to evk.dtsi and only override regulator
> in the board files, please
> 
> Konrad

ACK, will re-arrange.

Thanks,
Monish
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.