[PATCH v7 4/5] arm64: dts: qcom: Add Shikra IQ2390S SoM platform
Komal Bajaj <[email protected]> Wed, 08 Jul 2026 17:47:33 +0530
| Newsgroups | org.kernel.vger.linux-mmc,org.infradead.lists.linux-phy,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Add device tree include for the IQ2390S variant of the Shikra System-on-Module, an industrial compute module integrating the Shikra SoC and PMIC for industrial IoT applications, designed to mount on carrier boards. - shikra-iqs-som.dtsi: Industrial SoM without modem (PM8150 PMIC) The DTSI includes the common shikra.dtsi and adds PM8150 PMIC regulator definitions specific to this variant. Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Komal Bajaj <[email protected]> --- arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi | 170 +++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi new file mode 100644 index 000000000000..73945bf42112 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/shikra-iqs-som.dtsi @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +#include "shikra.dtsi" +#include "pm8150.dtsi" + +/ { + gpio-key { + compatible = "gpio-keys"; + label = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_n>; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + linux,can-disable; + }; + }; +}; + +&pm8150_gpios { + vol_up_n: vol-up-n-state { + pins = "gpio6"; + function = PMIC_GPIO_FUNC_NORMAL; + input-enable; + bias-pull-up; + power-source = <0>; + }; + +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + linux,code = <KEY_VOLUMEDOWN>; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8150-regulators"; + + pm8150_s4: s4 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <2040000>; + }; + + pm8150_s5: s5 { + regulator-min-microvolt = <1574000>; + regulator-max-microvolt = <2040000>; + }; + + pm8150_s6: s6 { + regulator-min-microvolt = <382000>; + regulator-max-microvolt = <1352000>; + }; + + pm8150_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + }; + + pm8150_s8: s8 { + regulator-min-microvolt = <570000>; + regulator-max-microvolt = <650000>; + }; + + pm8150_l1: l1 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + }; + + pm8150_l2: l2 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <3300000>; + }; + + pm8150_l3: l3 { + regulator-min-microvolt = <312000>; + regulator-max-microvolt = <1304000>; + }; + + pm8150_l4: l4 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <975000>; + }; + + pm8150_l5: l5 { + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + }; + + pm8150_l6: l6 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1000000>; + }; + + pm8150_l7: l7 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + pm8150_l8: l8 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1304000>; + }; + + pm8150_l9: l9 { + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1000000>; + }; + + pm8150_l10: l10 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + pm8150_l11: l11 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1304000>; + }; + + pm8150_l12: l12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1950000>; + }; + + pm8150_l13: l13 { + regulator-min-microvolt = <2921000>; + regulator-max-microvolt = <3230000>; + }; + + pm8150_l14: l14 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1910000>; + }; + + pm8150_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8150_l16: l16 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <3544000>; + }; + + pm8150_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + pm8150_l18: l18 { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <728000>; + }; + }; +}; -- 2.34.1