Re: [PATCH v19 08/12] mmc: renesas_sdhi: Add RZ/G3L SDHI support

Hi Biju,

On Thu, 9 Jul 2026 at 21:29, Biju <[email protected]> wrote:
> From: Biju Das <[email protected]>
>
> The RZ/G3L SoC (r9a08g046) has an SDHI controller with several
> differences from existing platforms, requiring dedicated handling.
>
> Utilise the TMIO_MMC_HWADJ flag to identify controllers that carry
> a second hardware adjustment register (SDm_SCC_HWADJ2 at offset 0x010).
> When both TMIO_MMC_TUNING_DELAY and TMIO_MMC_HWADJ are set,
> renesas_sdhi_set_hw_adjustment_delay() additionally programs HWADJ2
> with 0x3FFF at 3.3 V and 0xFF at 1.8 V. A new RZG3L_SDHI_SCC_HWADJ4
> register (offset 0x022) is also cleared at the start of tuning when
> TMIO_MMC_INTERNAL_DIVIDER is set.
>
> Add a new version constant SDHI_VER_RZ_G3L_SDMMC (0xce10) and extend
> renesas_sdhi_sdbuf_width() to handle it alongside the existing Gen3
> variants.
>
> Introduce of_data_rzg3l with RZ/G3L-specific parameters: a wider
> clk_mask of 0x200000200, a max_divider of 2048 (reflecting the 11-bit
> divider), a dedicated rzg3l_scc_taps table, and all relevant tmio_flags,
> including TMIO_MMC_INTERNAL_DIVIDER and TMIO_MMC_HWADJ. Wire it to a
> new of_rzg3l_compatible entry using sdhi_quirks_rzg3l (which sets
> fixed_addr_mode), and register the "renesas,sdhi-r9a08g046" compatible
> string in the OF match table.
>
> Signed-off-by: Biju Das <[email protected]>
> ---
> v18->v19:
>  * Update commit description.
>  * Updated handling for clk divider.
>  * Renamed TMIO_MMC_HWADJ2->TMIO_MMC_HWADJ to make it generic for
>    hardware tuning delays
>  * Dropped duplicate SH_MOBILE_SDHI_SCC_TMPPORT2 macro

Thanks for the update!

> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c

> @@ -234,7 +236,14 @@ static void renesas_sdhi_set_clock(struct tmio_mmc_host *host,
>         }
>
>         clock = clk & CLK_CTL_DIV_MASK;
> -       if (clock != CLK_CTL_DIV_MASK)
> +       if (host->pdata->max_divider != SDHI_MAX_DIVIDER_DEFAULT) {
> +               u64 tmp;
> +
> +               tmp = FIELD_GET(GENMASK(9, 8), clk);
> +               clock |= FIELD_PREP(GENMASK(17, 16), tmp);

This fails to build on RZ/Five, due to missing #include <linux/bitfield.h>.

Oh, fixed in v20...

> +       }
> +
> +       if ((clock & CLK_CTL_DIV_MASK) != CLK_CTL_DIV_MASK)
>                 host->mmc->actual_clock /= (1 << (ffs(clock) + 1));
>
>         sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clock);

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds