[PATCH v2 2/4] mmc: sdhci_am654: Reset command and data lines on failed tuning

The CMD/DATA reset after tuning should be performed regardless of
whether tuning succeeded or failed, since tuning data may remain in
the buffer in either case. Move the error return after the reset so
that the controller is always cleaned up.

Fixes: de31f6ab68a3 ("mmc: sdhci_am654: Reset Command and Data line after tuning")
Cc: <[email protected]>
Signed-off-by: Diogo Ivo (Schneider Electric) <[email protected]>
---
Changes in v2:
 - No changes
---
 drivers/mmc/host/sdhci_am654.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c
index 35c3efd92112..0db587e702ac 100644
--- a/drivers/mmc/host/sdhci_am654.c
+++ b/drivers/mmc/host/sdhci_am654.c
@@ -442,15 +442,13 @@ static int sdhci_am654_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct sdhci_host *host = mmc_priv(mmc);
 	int err = sdhci_execute_tuning(mmc, opcode);
 
-	if (err)
-		return err;
 	/*
 	 * Tuning data remains in the buffer after tuning.
 	 * Do a command and data reset to get rid of it
 	 */
 	sdhci_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
 
-	return 0;
+	return err;
 }
 
 static u32 sdhci_am654_cqhci_irq(struct sdhci_host *host, u32 intmask)

-- 
2.55.0