[PATCH v6 0/3] mmc-utils: lsmmc: add 'mmc list' command

This series adds a 'mmc list' command to lsmmc that scans
/sys/bus/mmc/devices/ and prints a one-line summary per MMC/SD device
(device name, /dev path, bus type, manufacturer, product, revision,
serial number, and manufacturing date), and teaches the existing
register-read commands to accept /dev and /sys/block paths directly
instead of only sysfs device directories.

Changes since v5:
- Patch 1 (Use external .ids files ...): carried forward the
  0x09 "ATP" sd_database entry from the mainline-only fix in
  d64cb08 ("mmc-utils: lsmmc.c: Add ATP to SD Card Manufacturer ID
  database") into the new sdcard.ids, so the manufacturer ID isn't
  lost in the move to external ID files.
- Picked up Reviewed-by: Avri Altman <[email protected]> on
  all three patches.

Torstein Eide (3):
  mmc-utils: lsmmc: Use external .ids files and accept /dev, /sys/block
    paths
  mmc-utils: lsmmc: Factor out CID month/year helpers
  mmc-utils: lsmmc: Add mmc list command

 Makefile           |   8 +-
 docs/HOWTO.rst     |  71 ++++-
 lsmmc.c            | 649 ++++++++++++++++++++++++++-------------------
 mmc.c              |   6 +-
 mmc_cmds.h         |   1 +
 multimediacard.ids |  16 ++
 sdcard.ids         |  24 ++
 7 files changed, 486 insertions(+), 289 deletions(-)
 create mode 100644 multimediacard.ids
 create mode 100644 sdcard.ids

--
2.53.0