Re: Cannot run Freepascal compiler under DOSemu

Are you running this with dosemu -s?  what 32 bit binary?? what
version of dosemu??


On Mon, Apr 5, 2010 at 3:55 PM, John Coppens <[email protected]> wrote:
> Hi all.
>
> I'm running the 32-bit DOSemu binary on an AMD64 system, and by far most
> applications run fine. I have trouble with the Freepascal compiler though.
> Both its installer and the actual compiler fail.
>
> In the case of the compiler, running it without parameters gives the
> command line options. This works fine. When a source file is specified,
> DOSemu aborts with the message below. Do I have to modify the conf file?
> I have tried several changes, none make any difference.
>
> I'd appreciate suggestions!
> John
>
> Output from DOSemu:
>
> ERROR: Fault handler re-entered! signal=11 _trapno=0xE
> ERROR: cpu exception in dosemu code outside of DPMI client!
> trapno: 0x0e  errorcode: 0x00000007  cr2: 0x00000000
> eip: 0x004a2cc1  esp: 0x7fff16e2d270  eflags: 0x00010202
> cs: 0x0033  ds: 0x013f  es: 0x013f  ss: 0x002b
> ERROR: Please report the contents of ~/.dosemu/boot.log at
> http://sourceforge.net/tracker/?atid=457447&group_id=49784&func=browse
> It would be even more helpful if would recompile DOSEMU and reproduce this
> bug with "debug on" in compiletime-settings.
> Page fault: write instruction to linear address: 0x00000000
> CPU was in user mode
> Exception was caused by insufficient privilege
> --
> To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html