Re: printing

     Hello.
     That file that you attached seems unrelated to the problem.
     If the "cat" commands don't work then we can exclude CUPS from the 
problem, the way that the program prints seems to not be compatible with 
DOSEmu.
     From my part, I don't know what else to suggest :-(.
     Do you have the source code of the program? Can you see exactly how 
it prints?
     Good luck!!!
P.s.: maybe you can try to use QEmu-KVM or Virtual Box or VMWare or 
another virtualization technology to run DOS and the program.



El 20/11/10 18:49, Vedran Vucic escribi贸:
> Hello,
>
> When I tried to print I checked  .var/spool/cups and I attached file
> which may be helpful.
> As far asI see dosemu gives it to cups but cups does not print it.
> INdeed, I print normally from other applications and dosemu itself.
> Maybe it requires some change of format in order to get it printed out?
>
> Thanks,
>
> Vedran
>
>
>
> On Sat, Nov 20, 2010 at 1:49 PM, Ivan Baldo<[email protected]>  wrote:
>    
>>     Hello.
>>     Strange then... it seems everything is configured right but your specific
>> application doesn't work.
>>     Have you waited more than 20 seconds?
>>     Also, you may try putting this in dosemu.conf:
>> $_lpt1 = "lpr -P Laserprinter"
>> $_lpt2 = "lpr -P Laserprinter"
>> $_lpt3 = "lpr -P Laserprinter"
>>     This is just in case that it uses another port.
>>
>>     Another thing you can try:
>> $_lpt1 = "cat>>/tmp/dosemu.lpt1"
>> $_lpt2 = "cat>>/tmp/dosemu.lpt2"
>> $_lpt3 = "cat>>/tmp/dosemu.lpt3"
>>     Then try printing from the program and look at those files in /tmp to see
>> what they contain.
>>
>>     Hope this helps!
>>     Bye.
>>
>>
>>
>> El 19/11/10 03:46, Vedran Vucic escribi贸:
>>      
>>> Hello,
>>>
>>> When I do command: dir>PRN it prints a list of subfolders.
>>>
>>> My DOS application prints to PRN. Any advise?
>>>
>>> Best wishes,
>>>
>>> Veki
>>>
>>> On Fri, Nov 19, 2010 at 1:14 AM, Ivan Baldo<[email protected]>   wrote:
>>>
>>>        
>>>>     Hello.
>>>>     Your boot.log looks right!
>>>>     The DOS application prints to LPT1 or PRN? Maybe it prints to LPT2 or
>>>> LPT3 in which case you can configure them in dosemu.conf to be the same
>>>> printer.
>>>>     If you execute under DOS the command "dir>PRN" does it print anything?
>>>>     HTH.
>>>>     Bye.
>>>>
>>>>
>>>>
>>>> El 18/11/10 22:02, Vedran Vucic escribi贸:
>>>>
>>>>          
>>>>> Hello,
>>>>>
>>>>> Please check this:
>>>>> http://pastebin.ca/1995937
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Veki
>>>>>
>>>>> On Fri, Nov 19, 2010 at 12:52 AM, Ivan Baldo<[email protected]>
>>>>> wrote:
>>>>>
>>>>>
>>>>>            
>>>>>>     Hello.
>>>>>>     The config file seems correct.
>>>>>>     But maybe DOSEmu isn't reading that file but another.
>>>>>>     Please post the file boot.log (usually in ~/.dosemu/boot.log).
>>>>>>     Thanks!!!
>>>>>>
>>>>>>
>>>>>> El 18/11/10 21:18, Vedran Vucic escribi贸:
>>>>>>
>>>>>>
>>>>>>              
>>>>>>> Hello,
>>>>>>>
>>>>>>> When I want to print from my DOS application I cannot print on my USB
>>>>>>> HP LP1020 printer. My printer is named Laserprinter in my cups
>>>>>>> configuration. When I print from terminal using command
>>>>>>> lpr -P Laserprinter nameoffile
>>>>>>> it works well.
>>>>>>> You can find my dosemu.conf on this link:
>>>>>>> http://pastebin.ca/1995898
>>>>>>>
>>>>>>> Please advise.
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Veki
>>>>>>>                
>> --
>> Ivan Baldo - [email protected] - http://ibaldo.codigolibre.net/
>>  From Montevideo, Uruguay, at the south of South America.
>> Freelance programmer and GNU/Linux system administrator, hire me!
>> Alternatives: [email protected] - http://go.to/ibaldo
>>
>>
>>      

-- 
Ivan Baldo - [email protected] - http://ibaldo.codigolibre.net/
 From Montevideo, Uruguay, at the south of South America.
Freelance programmer and GNU/Linux system administrator, hire me!
Alternatives: [email protected] - http://go.to/ibaldo

--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html