Re: A video problem

Hello

It's really important to me to get dosemu to work, if possible. Hope
someone can help. I tried to start dosemu after booting the machine
with the kernel parameters "console=tty0 nomodeset vga=normal"
removed. Then dosemu starts, but on my braille display (I need it
because I'm blind), I then get: Screen is not in text mode. For
further details, look below.

Lars

On Sat, Jul 12, 2014 at 11:12:53PM +0200, Lars Bjørndal wrote:
> Hello list
> 
> I've used dosemu for years, and it has worked perfectly. After some
> upgrades and hardware replacements, I cannot get dosemu to work any more. As
> I always use console and never use GUI, I have the following kernel
> command line: "console=tty0 nomodeset vga=normal". So I don't have any
> framebuffer.
> 
> I use Fedora 20, and have the package
> dosemu-1.4.0.8-18.20131022git.fc20.x86_64 installed. When I run dosemu
> with the -s flag, I get the following error messages:
> 
> Running as root in full feature mode
> ERROR: SDL: No available video device
> ERROR: PORT: conflicting devices: VGAEmu VGA Controller & extra stuff
> for port 0
> x3c0
> ERROR: PORT: conflicting devices: VGAEmu CRT Controller & video port io
> for port
>  0x3d4
> ERROR: PORT: conflicting devices: VGAEmu Input Status #1/Feature Control
> & extra
>  stuff for port 0x3da
> ERROR: PORT: conflicting devices: VGAEmu Mono/Hercules Card Range 0 &
> video port
>  io for port 0x3b4
> ERROR: PORT: conflicting devices: VGAEmu Mono/Hercules Card Range 1 &
> extra stuff for port 0x3bf
> 
> Some output from lshw is:
> 
>         *-display:0 UNCLAIMED
>              description: VGA compatible controller
>              product: 82Q963/Q965 Integrated Graphics Controller
>              vendor: Intel Corporation
>              physical id: 2
>              bus info: pci@0000:00:02.0
>              version: 02
>              width: 64 bits
>              clock: 33MHz
>              capabilities: msi pm vga_controller cap_list
>              configuration: latency=0
>              resources: memory:fea00000-feafffff
>              memory:d0000000-dfffffff ioport
> :ecb8(size=8)
>         *-display:1 UNCLAIMED
>              description: Display controller
>              product: 82Q963/Q965 Integrated Graphics Controller
>              vendor: Intel Corporation
>              physical id: 2.1
>              bus info: pci@0000:00:02.1
>              version: 02
>              width: 32 bits
>              clock: 33MHz
>              capabilities: pm bus_master cap_list
>              configuration: latency=0
>              resources: memory:feb00000-febfffff
> 
> Will it be possibel for me to run dosemu without enabling framebuffer
> support? If yes, what configuration parameters do I need to insert into
> my /etc/dosemu/dosemu.conf file?
> 
> Thanks and regards,
> Lars
--
To unsubscribe from this list: send the line "unsubscribe linux-msdos" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html