Re: [PATCH v2 5/6] gpio: remove machine hogs

On Tue, May 19, 2026 at 05:46:50PM -0700, Dmitry Torokhov wrote:
> On Mon, Mar 09, 2026 at 01:42:41PM +0100, Bartosz Golaszewski wrote:
> > With no more users, remove legacy machine hog API from the kernel.
> > 
> > Reviewed-by: Linus Walleij <[email protected]>
> > Reviewed-by: Andy Shevchenko <[email protected]>
> > Signed-off-by: Bartosz Golaszewski <[email protected]>
> 
> Argh! What is the replacement for this? I have patches for rsk7203 to
> use them to get rid of legacy gpio use, like this:
> 
> diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
> index f8760a91e2f1..5bbd3b31cffb 100644
> --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
> +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
> @@ -12,7 +12,7 @@
>  #include <linux/smsc911x.h>
>  #include <linux/input.h>
>  #include <linux/io.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/gpio/machine.h>
>  #include <linux/gpio/property.h>
>  #include <asm/machvec.h>
> @@ -165,6 +165,19 @@ static const struct platform_device_info rsk7203_devices[] __initconst = {
>  	},
>  };
>  
> +/* The base of the function GPIOs in the flat enum */
> +#define SH7203_FN_BASE GPIO_FN_PINT7_PB
> +
> +static struct gpiod_hog rsk7203_gpio_hogs[] = {
> +	GPIO_HOG("sh7203_pfc-fn", GPIO_FN_TXD0 - SH7203_FN_BASE,
> +		 "TXD0", GPIO_ACTIVE_HIGH, GPIOD_ASIS),
> +	GPIO_HOG("sh7203_pfc-fn", GPIO_FN_RXD0 - SH7203_FN_BASE,
> +		 "RXD0", GPIO_ACTIVE_HIGH, GPIOD_ASIS),
> +	GPIO_HOG("sh7203_pfc-fn", GPIO_FN_IRQ0_PB - SH7203_FN_BASE,
> +		 "IRQ0_PB", GPIO_ACTIVE_HIGH, GPIOD_ASIS),
> +	{ }
> +};
> +
>  static int __init rsk7203_devices_setup(void)
>  {
>  	struct platform_device *pd;
> @@ -172,12 +185,10 @@ static int __init rsk7203_devices_setup(void)
>  	int i;
>  
>  	/* Select pins for SCIF0 */
> -	gpio_request(GPIO_FN_TXD0, NULL);
> -	gpio_request(GPIO_FN_RXD0, NULL);
> +	gpiod_add_hogs(rsk7203_gpio_hogs);
>  
>  	/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
>  	__raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
> -	gpio_request(GPIO_FN_IRQ0_PB, NULL);
>  
>  	error = software_node_register_node_group(rsk7203_swnodes);
>  	if (error) {
> 
> 
> If there is no replacement maybe we can resurrect this? Or shoudl we
> have add swnode support for hogs?

Hmm, I guess it is already there so I should simply switch. Sorry about
the noise.

Thanks.

-- 
Dmitry