[PATCH] ARM: dts: ti: Fix typos in comments
Vidhu Sarwal <[email protected]> Fri, 26 Jun 2026 16:47:20 +0530
| Newsgroups | org.kernel.vger.linux-omap,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Fix comment typos found with codespell across DaVinci and OMAP board files: limitaion -> limitation swithes -> switches converstion -> conversion differnet -> different Signed-off-by: Vidhu Sarwal <[email protected]> --- arch/arm/boot/dts/ti/davinci/da850-lcdk.dts | 2 +- arch/arm/boot/dts/ti/omap/am3517-evm.dts | 2 +- arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts | 2 +- arch/arm/boot/dts/ti/omap/omap4-panda-es.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts index 8390d71b000a..e70edd5274fe 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-lcdk.dts @@ -366,7 +366,7 @@ nand@2000000,0 { * to NAND block 1 (NAND block 0 is not used by default)". * The same doc mentions that for ROM "Silicon Revision 2.1", * "Updated NAND boot mode to offer boot from block 0 or block 1". - * However the limitaion is left here by default for compatibility + * However the limitation is left here by default for compatibility * with older silicon and because it needs new boot pin settings * not possible in stock LCDK. */ diff --git a/arch/arm/boot/dts/ti/omap/am3517-evm.dts b/arch/arm/boot/dts/ti/omap/am3517-evm.dts index 40f15da81043..a4357fa9f006 100644 --- a/arch/arm/boot/dts/ti/omap/am3517-evm.dts +++ b/arch/arm/boot/dts/ti/omap/am3517-evm.dts @@ -213,7 +213,7 @@ &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; - /* User DIP swithes [1:8] / User LEDS [1:2] */ + /* User DIP switches [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { compatible = "ti,tca6416"; reg = <0x21>; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index 43cf4ade950b..76bfb364777e 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -420,7 +420,7 @@ stmpe811@41 { st,mod-12b = <1>; /* 12-bit ADC */ st,ref-sel = <0>; /* internal ADC reference */ st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */ - st,sample-time = <4>; /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; /* ADC conversion time: 80 clocks */ stmpe_adc { compatible = "st,stmpe-adc"; diff --git a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts index a933fe560834..70c609811d11 100644 --- a/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts +++ b/arch/arm/boot/dts/ti/omap/omap4-panda-es.dts @@ -12,7 +12,7 @@ / { compatible = "ti,omap4-panda-es", "ti,omap4-panda", "ti,omap4460", "ti,omap4430", "ti,omap4"; }; -/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +/* Audio routing is different between PandaBoard4430 and PandaBoardES */ &sound { ti,model = "PandaBoardES"; -- 2.53.0