[PATCH v3 4/4] dt-bindings: leds: backlight: Convert TPS65217 to DT schema

Convert the Texas Instruments TPS65217 bindings to DT schema.

During the conversion, the following updates were made:
- Documented the 'regulators', 'charger' and 'pwrbutton' child nodes,
  which are used by the boards but were missing from the old txt
  binding.
- Documented the 'interrupts', 'interrupt-controller', '#interrupt-cells'
  and 'ti,pmic-shutdown-controller' properties, which are used by the
  am335x boards and read by the driver.

Signed-off-by: Eduard Bostina <[email protected]>
---
 .../bindings/leds/backlight/ti,tps65217.yaml  | 170 ++++++++++++++++++
 .../leds/backlight/tps65217-backlight.txt     |  27 ---
 2 files changed, 170 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ti,tps65217.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt

diff --git a/Documentation/devicetree/bindings/leds/backlight/ti,tps65217.yaml b/Documentation/devicetree/bindings/leds/backlight/ti,tps65217.yaml
new file mode 100644
index 000000000000..4d2f4dbd2d52
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/ti,tps65217.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/ti,tps65217.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 family of regulators
+
+maintainers:
+  - Eduard Bostina <[email protected]>
+
+description:
+  The TPS65217 chip contains a boost converter and current sinks which can be
+  used to drive LEDs for use as backlights.
+
+properties:
+  compatible:
+    const: ti,tps65217
+
+  reg:
+    maxItems: 1
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  ti,pmic-shutdown-controller:
+    type: boolean
+    description:
+      Set the PMIC to shutdown on PWR_EN toggle.
+
+  backlight:
+    type: object
+    additionalProperties: false
+    description:
+      Node for specifying WLED1 and WLED2 lines in TPS65217.
+
+    properties:
+      isel:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [1, 2]
+        description: |
+          Selection bit. Valid values:
+            1 - ISEL1 (low-level)
+            2 - ISEL2 (high-level)
+
+      fdim:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum: [100, 200, 500, 1000]
+        description:
+          PWM dimming frequency in Hz.
+
+      default-brightness:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        minimum: 0
+        maximum: 100
+
+    required:
+      - isel
+      - fdim
+      - default-brightness
+
+  regulators:
+    type: object
+    additionalProperties: false
+    description:
+      List of child nodes that specify the regulator initialization data.
+      Not all regulators for the given device need to be present.
+
+    patternProperties:
+      "^(dcdc[1-3]|ldo[1-4])$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+  charger:
+    $ref: /schemas/power/supply/tps65217-charger.yaml#
+    unevaluatedProperties: false
+
+  pwrbutton:
+    $ref: /schemas/input/ti,tps65217-pwrbutton.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@24 {
+            compatible = "ti,tps65217";
+            reg = <0x24>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            ti,pmic-shutdown-controller;
+
+            backlight {
+                isel = <1>;   /* 1 - ISET1, 2 ISET2 */
+                fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+                default-brightness = <50>;
+            };
+
+            charger {
+                compatible = "ti,tps65217-charger";
+                interrupts = <0>, <1>;
+                interrupt-names = "USB", "AC";
+            };
+
+            pwrbutton {
+                compatible = "ti,tps65217-pwrbutton";
+                interrupts = <2>;
+            };
+
+            regulators {
+                dcdc1 {
+                    regulator-name = "vdds_dpr";
+                    regulator-always-on;
+                };
+
+                dcdc2 {
+                    regulator-name = "vdd_mpu";
+                    regulator-min-microvolt = <925000>;
+                    regulator-max-microvolt = <1351500>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                dcdc3 {
+                    regulator-name = "vdd_core";
+                    regulator-min-microvolt = <925000>;
+                    regulator-max-microvolt = <1150000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1 {
+                    regulator-name = "vio,vrtc,vdds";
+                    regulator-always-on;
+                };
+
+                ldo2 {
+                    regulator-name = "vdd_3v3aux";
+                    regulator-always-on;
+                };
+
+                ldo3 {
+                    regulator-name = "vdd_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-always-on;
+                };
+
+                ldo4 {
+                    regulator-name = "vdd_3v3a";
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
deleted file mode 100644
index 5fb9279ac287..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-TPS65217 family of regulators
-
-The TPS65217 chip contains a boost converter and current sinks which can be
-used to drive LEDs for use as backlights.
-
-Required properties:
-- compatible: "ti,tps65217"
-- reg: I2C slave address
-- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
-- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
-- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
-- default-brightness: valid values: 0-100
-
-Each regulator is defined using the standard binding for regulators.
-
-Example:
-
-	tps: tps@24 {
-		reg = <0x24>;
-		compatible = "ti,tps65217";
-		backlight {
-			isel = <1>;  /* 1 - ISET1, 2 ISET2 */
-			fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
-			default-brightness = <50>;
-		};
-	};
-
-- 
2.43.0