Re: [PATCH 1/2] dt-bindings: rtc: Convert TI Palmas RTC to DT schema
Rob Herring <[email protected]> Tue, 21 Jul 2026 08:51:13 -0500
| Newsgroups | org.kernel.vger.linux-omap,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-rtc |
|---|---|
| Message-ID | <[email protected]> |
On Sun, Jul 19, 2026 at 04:56:39PM +0200, Alexandre Belloni wrote: > On 19/07/2026 14:10:07+0000, Eduard Bostina wrote: > > Convert the Texas Instruments Palmas RTC controller bindings > > to DT schema. > > > > As part of the conversion, declare 'wakeup-source: true'. > > This documents the Palmas PMIC's capability to wake the system. > > > > Signed-off-by: Eduard Bostina <[email protected]> > > --- > > .../devicetree/bindings/rtc/rtc-palmas.txt | 32 ----------- > > .../bindings/rtc/ti,palmas-rtc.yaml | 57 +++++++++++++++++++ > > 2 files changed, 57 insertions(+), 32 deletions(-) > > delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-palmas.txt > > create mode 100644 Documentation/devicetree/bindings/rtc/ti,palmas-rtc.yaml > > > > diff --git a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt b/Documentation/devicetree/bindings/rtc/rtc-palmas.txt > > deleted file mode 100644 > > index c6cf37758a77..000000000000 > > --- a/Documentation/devicetree/bindings/rtc/rtc-palmas.txt > > +++ /dev/null > > @@ -1,32 +0,0 @@ > > -Palmas RTC controller bindings > > - > > -Required properties: > > -- compatible: > > - - "ti,palmas-rtc" for palma series of the RTC controller > > -- interrupts: Interrupt number of RTC submodule on device. > > - > > -Optional properties: > > - > > -- ti,backup-battery-chargeable: The Palmas series device like TPS65913 or > > - TPS80036 supports the backup battery for powering the RTC when main > > - battery is removed or in very low power state. The backup battery > > - can be chargeable or non-chargeable. This flag will tells whether > > - battery is chargeable or not. If charging battery then driver can > > - enable the charging. > > -- ti,backup-battery-charge-high-current: Enable high current charging in > > - backup battery. Device supports the < 100uA and > 100uA charging. > > - The high current will be > 100uA. Absence of this property will > > - charge battery to lower current i.e. < 100uA. > > - > > -Example: > > - palmas: tps65913@58 { > > - ... > > - palmas_rtc: rtc { > > - compatible = "ti,palmas-rtc"; > > - interrupt-parent = <&palmas>; > > - interrupts = <8 0>; > > - ti,backup-battery-chargeable; > > - ti,backup-battery-charge-high-current; > > - }; > > - ... > > - }; > > diff --git a/Documentation/devicetree/bindings/rtc/ti,palmas-rtc.yaml b/Documentation/devicetree/bindings/rtc/ti,palmas-rtc.yaml > > new file mode 100644 > > index 000000000000..ac64f0589c84 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/rtc/ti,palmas-rtc.yaml > > @@ -0,0 +1,57 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/rtc/ti,palmas-rtc.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Texas Instruments Palmas RTC > > + > > +maintainers: > > + - Eduard Bostina <[email protected]> > > + > > +allOf: > > + - $ref: /schemas/rtc/rtc.yaml# > > + > > +properties: > > + compatible: > > + const: ti,palmas-rtc > > + > > + interrupts: > > + maxItems: 1 > > + > > + wakeup-source: true > > + > > + ti,backup-battery-chargeable: > > + type: boolean > > + description: > > + The backup battery can be chargeable or non-chargeable. This flag > > + indicates whether the battery is chargeable. If present, the driver > > + can enable charging. > > + > > It would be great to convert to the genric proeprty which is > aux-voltage-chargeable from rtc.yaml > > > + ti,backup-battery-charge-high-current: > > + type: boolean > > + description: > > + Enable high current charging in the backup battery. > > + Device supports the < 100uA and > 100uA charging. The high current will > > + be > 100uA. Absence of this property will charge battery to lower > > + current i.e. < 100uA. > > > I guess we could make trickle-resistor-ohms fit or get a new generic > property for this. Would be nice, but this is an existing binding on old h/w. We're stuck with it. Rob