Re: [PATCH 4/6] PCI/pwrctrl: tc9563: Skip Tx amplitude and DFE tuning for DSP3
Manivannan Sadhasivam <[email protected]>
| Newsgroups | org.kernel.vger.linux-pci,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <a2v3seclmgu2lqpf7w2icamnz2iwwjahveryjke272nrx2oary@kgq755ojyxdk> |
On Tue, Jul 28, 2026 at 11:04:57AM -0500, Bjorn Helgaas wrote: > On Tue, Jul 28, 2026 at 03:25:29PM +0200, Manivannan Sadhasivam wrote: > > On Mon, Jul 27, 2026 at 10:59:11AM -0500, Alex Elder wrote: > > > On 7/25/26 3:59 AM, Manivannan Sadhasivam via B4 Relay wrote: > > > > From: Manivannan Sadhasivam <[email protected]> > > > > > > > > DSP3 doesn't support tuning Tx amplitude and DFE settings. So just skip > > > > the setting if DT has passed the tuning properties. There is no need to > > > > error out the whole driver because of it. > > > > > > > > Fixes: 4c9c7be47310 ("PCI: pwrctrl: Add power control driver for TC9563") > > > > Signed-off-by: Manivannan Sadhasivam <[email protected]> > > > > > > So to keep things simple, tc9563_pwrctrl_parse_device_dt() is called > > > for all downstream ports but you ignore the setting (with a warning) > > > for those that do not apply to DSP3. > > > > > > What about tc9563_pwrctrl_set_nfts()? > > > > Good catch! I missed adding the check for N_FTS as well: > > > > ``` > > diff --git a/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c b/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c > > index 9d869483b6b3..978907aa0ce5 100644 > > --- a/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c > > +++ b/drivers/pci/pwrctrl/pci-pwrctrl-tc9563.c > > @@ -410,11 +410,17 @@ static int tc9563_pwrctrl_set_nfts(struct tc9563_pwrctrl *tc9563, > > {TC9563_NFTS_2_5_GT, nfts[0]}, > > {TC9563_NFTS_5_GT, nfts[1]}, > > }; > > + struct device *dev = tc9563->pwrctrl.dev; > > int ret; > > > > if (!nfts[0]) > > return 0; > > > > + if (port == TC9563_VDSP) { > > + dev_dbg(dev, "N_FTS tuning not supported for VDSP\n"); > > + return 0; > > + } > > + > > ret = tc9563_pwrctrl_i2c_write(tc9563->client, TC9563_PORT_SELECT, > > BIT(port)); > > if (ret) > > ``` > > > > @Bjorn: Could you please amend the above diff with this commit? > > It didn't apply cleanly (maybe whitespace damage?), but I applied it > by hand: > https://git.kernel.org/cgit/linux/kernel/git/pci/pci.git/commit/?id=b859b9366b44 LGTM, thanks! - Mani -- மணிவண்ணன் சதாசிவம்