Re: [pciutils PATCH v2] lspci: Determine bridge window address size from bridge_flags

Hello! Thank you for taking this issue. I briefly checked the change and
I think that this is the right way how to address that issue.

Anyway, it would be nice to provide some example of config space of PCI
Bridge (lspci -x) which is affected by this issue and have it in
pciutils/tests/ directory.

On Friday 21 August 2026 22:15:59 David Matlack wrote:
> Use bridge_flags to determine address size bits (16- vs 32-bit for I/O,
> 32- vs 64-bit for prefetchable memory) when displaying bridge ranges
> populated via PCI_FILL_BRIDGE_BASES.
> 
> Commit ccf68033a452 ("lspci: Use PCI_FILL_BRIDGE_BASES to detect if
> range behind bridge is disabled or unsupported") introduced code in
> show_htype1() that reads PCI_IO_RANGE_TYPE_MASK and
> PCI_MEMORY_RANGE_TYPE_MASK from bridge_base_addr[]. However,
> bridge_base_addr[] holds base addresses without flags, as documented in
> lib/pci.h and implemented across backends like sysfs.c and
> win32-cfgmgr32.c.
> 
> Because bridge_base_addr[] does not contain configuration register flag
> bits, masking the lower bits evaluates to zero. As a result, 32-bit I/O
> windows are mislabeled as "[16-bit]" and 64-bit prefetchable memory
> windows are mislabeled as "[32-bit]" when using PCI_FILL_BRIDGE_BASES.
> 
> Fixes: ccf68033a452 ("lspci: Use PCI_FILL_BRIDGE_BASES to detect if range behind bridge is disabled or unsupported")
> Signed-off-by: David Matlack <[email protected]>
> ---
> v2:
>  - Fix lspci.c to use bridge_flags[], per lib/pci.h, rather than
>    changing the behavior of just the sysfs backend (Pali Rohár)
> 
> v1: https://lore.kernel.org/linux-pci/[email protected]/
> 
>  lspci.c | 12 +++++-------
>  1 file changed, 5 insertions(+), 7 deletions(-)
> 
> diff --git a/lspci.c b/lspci.c
> index 2a14303e74f6..52fd9247aefb 100644
> --- a/lspci.c
> +++ b/lspci.c
> @@ -571,10 +571,9 @@ show_htype1(struct device *d)
>  
>    if ((p->known_fields & PCI_FILL_BRIDGE_BASES) && !io_disabled)
>      {
> -      io_base = p->bridge_base_addr[0] & PCI_IO_RANGE_MASK;
> +      io_base = p->bridge_base_addr[0];
>        io_limit = io_base + p->bridge_size[0] - 1;
> -      io_type = p->bridge_base_addr[0] & PCI_IO_RANGE_TYPE_MASK;
> -      io_bits = (io_type == PCI_IO_RANGE_TYPE_32) ? 32 : 16;
> +      io_bits = (p->bridge_flags[0] & PCI_IORESOURCE_IO_16BIT_ADDR) ? 16 : 32;
>        show_range("\tI/O behind bridge", io_base, io_limit, io_bits, io_disabled);
>      }
>    else if (io_type != (io_limit & PCI_IO_RANGE_TYPE_MASK) ||
> @@ -600,7 +599,7 @@ show_htype1(struct device *d)
>  
>    if ((p->known_fields & PCI_FILL_BRIDGE_BASES) && !mem_disabled)
>      {
> -      mem_base = p->bridge_base_addr[1] & PCI_MEMORY_RANGE_MASK;
> +      mem_base = p->bridge_base_addr[1];
>        mem_limit = mem_base + p->bridge_size[1] - 1;
>        show_range("\tMemory behind bridge", mem_base, mem_limit, 32, mem_disabled);
>      }
> @@ -616,10 +615,9 @@ show_htype1(struct device *d)
>  
>    if ((p->known_fields & PCI_FILL_BRIDGE_BASES) && !pref_disabled)
>      {
> -      u64 pref_base_64 = p->bridge_base_addr[2] & PCI_MEMORY_RANGE_MASK;
> +      u64 pref_base_64 = p->bridge_base_addr[2];
>        u64 pref_limit_64 = pref_base_64 + p->bridge_size[2] - 1;
> -      pref_type = p->bridge_base_addr[2] & PCI_MEMORY_RANGE_TYPE_MASK;
> -      pref_bits = (pref_type == PCI_PREF_RANGE_TYPE_64) ? 64 : 32;
> +      pref_bits = (p->bridge_flags[2] & PCI_IORESOURCE_MEM_64) ? 64 : 32;
>        show_range("\tPrefetchable memory behind bridge", pref_base_64, pref_limit_64, pref_bits, pref_disabled);
>      }
>    else if (pref_type != (pref_limit & PCI_PREF_RANGE_TYPE_MASK) ||
> 
> base-commit: b41ce14da749fb44ca7940ba9797027bfa62c23e
> -- 
> 2.55.0.766.g2966f0265a-goog
>