Re: [PATCH v12 08/11] tracing/wprobe: Add set_wprobe and clear_wprobe event triggers

On 8/7/2026 11:34 PM, Masami Hiramatsu (Google) wrote:
> From: Masami Hiramatsu (Google) <[email protected]>
> 
> Add set_wprobe and clear_wprobe event triggers to dynamically attach
> and detach hardware breakpoint address monitoring based on event field
> contents.
> 

This patch does not build with wprobe enabled.

> Link: https://lore.kernel.org/all/59637b96946653393a7ad3c7de094094796b39c2.1785067572.git.wangjinchao600@gmail.com/
> 
> Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
> ---
> Changes in v12:
>  - Decrement trigger data->count only when watchpoint state is actually changed.
>  - Remove dyn_event_ops_mutex to fix lockdep circular dependency deadlock.
>  - Add event_trigger_init() call to prevent premature freeing of trigger_data.
>  - Use WRITE_ONCE() when modifying tw->addr to pair with READ_ONCE().
>  - Add missing braces to else-block in wprobe_trigger_print().
>  - Initialize tw->addr only after trace_event_enable_disable() succeeds.
>  - Counter counts only if the trigger is actually working.
> Changes in v11:
>  - Soft-enable (register) wprobe event on WPROBE_DEFAULT_CLEAR_ADDRESS.
>  - Add work_pending check before updating tw->addr.
> ---
>  Documentation/trace/wprobetrace.rst |   98 +++++++
>  include/linux/trace_events.h        |    1 
>  kernel/trace/Kconfig                |   10 +
>  kernel/trace/trace.h                |    1 
>  kernel/trace/trace_dynevent.h       |    1 
>  kernel/trace/trace_events_trigger.c |    2 
>  kernel/trace/trace_probe.c          |    2 
>  kernel/trace/trace_probe.h          |    9 +
>  kernel/trace/trace_wprobe.c         |  527 +++++++++++++++++++++++++++++++++++
>  9 files changed, 648 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/trace/wprobetrace.rst b/Documentation/trace/wprobetrace.rst
> index ad5f089b5ef5..a579347735d2 100644
> --- a/Documentation/trace/wprobetrace.rst
> +++ b/Documentation/trace/wprobetrace.rst
> @@ -68,3 +68,101 @@ Here is an example to add a wprobe event on a variable `jiffies`.
>             <idle>-0       [000] d.Z1.  717.026373: my_jiffies: (tick_do_update_jiffies64+0xbe/0x130)
>  
>  You can see the code which writes to `jiffies` is `tick_do_update_jiffies64()`.
> +
> +Combination with trigger action
> +-------------------------------
> +The event trigger action can extend the utilization of this wprobe.
> +
> +- set_wprobe:WPEVENT:FIELD[+|-ADJUST]
> +- clear_wprobe:WPEVENT[:FIELD[+|-]ADJUST]

Both forms accept an optional [:COUNT] which is not documented here.

> +
> +Set these triggers to the target event, then the WPROBE event will be
> +setup to trace the memory access at FIELD[+|-ADJUST] address.
> +When clear_wprobe is hit, if FIELD is NOT specified, the WPEVENT is
> +forcibly cleared. If FIELD[[+|-]ADJUST] is set, it clears WPEVENT only
> +if its watching address is the same as the FIELD[[+|-]ADJUST] value.

Two forms of adjust:
[+|-ADJUST]
[+|-]ADJUST


> +
> +Notes:
> +The set_wprobe trigger does not change the type and length, these
> +must be set when creating a new wprobe.
> +
> +The WPROBE event must be disabled when setting the new trigger
> +and it will be busy afterwards. Recommended usage is to add a new
> +wprobe at NULL address and keep disabled.
> +

> diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
> index d9b6fa5c35d9..5fd8ed63c516 100644
> --- a/kernel/trace/Kconfig
> +++ b/kernel/trace/Kconfig
> @@ -876,6 +876,16 @@ config WPROBE_EVENTS
>  	  Those events can be inserted wherever hardware breakpoints can be
>  	  set, and record accessed memory address and values.
>  
> +config WPROBE_TRIGGERS
> +	depends on WPROBE_EVENTS
> +	depends on HAVE_MODIFY_LOCAL_HW_BREAKPOINT_ADDR
> +	bool
> +	default y
> +	help
> +	  This adds an event trigger which will set the wprobe on a specific
> +	  field of an event. This allows user to trace the memory access of
> +	  an address pointed by the event field.
> +
>  config BPF_EVENTS
>  	depends on BPF_SYSCALL
>  	depends on (KPROBE_EVENTS || UPROBE_EVENTS) && PERF_EVENTS
> diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
> index 64851a8d021f..a789a722bc8b 100644
> --- a/kernel/trace/trace.h
> +++ b/kernel/trace/trace.h
> @@ -1983,6 +1983,7 @@ trigger_data_alloc(struct event_command *cmd_ops, char *cmd, char *param,
>  		   void *private_data);
>  extern void trigger_data_free(struct event_trigger_data *data);
>  extern int event_trigger_init(struct event_trigger_data *data);
> +extern void event_trigger_free(struct event_trigger_data *data);
>  extern int trace_event_trigger_enable_disable(struct trace_event_file *file,
>  					      int trigger_enable);
>  extern void update_cond_flag(struct trace_event_file *file);
> diff --git a/kernel/trace/trace_dynevent.h b/kernel/trace/trace_dynevent.h
> index beee3f8d7544..77c2c84dcdb5 100644
> --- a/kernel/trace/trace_dynevent.h
> +++ b/kernel/trace/trace_dynevent.h
> @@ -64,6 +64,7 @@ struct dyn_event {
>  };
>  
>  extern struct list_head dyn_event_list;
> +extern struct mutex dyn_event_ops_mutex;

dyn_event_ops_mutex is not needed anymore.

>  
>  static inline
>  int dyn_event_init(struct dyn_event *ev, struct dyn_event_operations *ops)
> diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c
> index ad83419cb420..fa409ebd73c2 100644
> --- a/kernel/trace/trace_events_trigger.c
> +++ b/kernel/trace/trace_events_trigger.c
> @@ -589,7 +589,7 @@ int event_trigger_init(struct event_trigger_data *data)
>   * Usually used directly as the @free method in event trigger
>   * implementations.
>   */
> -static void
> +void
>  event_trigger_free(struct event_trigger_data *data)
>  {
>  	if (WARN_ON_ONCE(data->ref <= 0))
> diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
> index 9f4cad18977a..36e07275a04d 100644
> --- a/kernel/trace/trace_probe.c
> +++ b/kernel/trace/trace_probe.c
> @@ -20,7 +20,7 @@
>  #undef C
>  #define C(a, b)		b
>  
> -static const char *trace_probe_err_text[] = { ERRORS };
> +const char *trace_probe_err_text[] = { ERRORS };
>  
>  static const char *reserved_field_names[] = {
>  	"common_type",
> diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
> index 6543d4c2cda5..e08f17c99138 100644
> --- a/kernel/trace/trace_probe.h
> +++ b/kernel/trace/trace_probe.h
> @@ -634,7 +634,12 @@ extern int traceprobe_define_arg_fields(struct trace_event_call *event_call,
>  	C(TYPECAST_SYM_OFFSET,	"@SYM+/-OFFSET with typecast needs parentheses"),	\
>  	C(USED_ARG_NAME,	"This argument name is already used"),		\
>  	C(WPROBE_NO_MAXACT,	"Watchpoint probe does not support maxactive"),	\
> -	C(WPROBE_NO_SIBLING,	"Watchpoint probe does not support sibling probes"),
> +	C(WPROBE_NO_SIBLING,	"Watchpoint probe does not support sibling probes"), \
> +	C(WPROBE_ON_KPROBE,	"Wprobe trigger is not supported on kprobe event"), \
> +	C(WPROBE_NOT_FOUND,	"Target wprobe event is not found"),		\
> +	C(WPROBE_BUSY,		"Target wprobe event is already enabled"),	\
> +	C(WPROBE_NEED_FIELD,	"Wprobe trigger requires a target field"),	\
> +	C(WPROBE_BAD_FIELD,	"Target field must be pointer size"),
>  
>  #undef C
>  #define C(a, b)		TP_ERR_##a
> @@ -658,6 +663,8 @@ void __trace_probe_log_err(int offset, int err);
>  
>  DEFINE_FREE(trace_probe_log_clear, const char *, if (_T) trace_probe_log_clear())
>  
> +extern const char *trace_probe_err_text[];
> +
>  #define trace_probe_log_err(offs, err)	\
>  	__trace_probe_log_err(offs, TP_ERR_##err)
>  
> diff --git a/kernel/trace/trace_wprobe.c b/kernel/trace/trace_wprobe.c
> index df592d9280a4..c64bbdc90a40 100644
> --- a/kernel/trace/trace_wprobe.c
> +++ b/kernel/trace/trace_wprobe.c
> @@ -6,7 +6,9 @@
>   */
>  #define pr_fmt(fmt)	"trace_wprobe: " fmt
>  
> +#include <linux/atomic.h>
>  #include <linux/compiler.h>
> +#include <linux/errno.h>
>  #include <linux/hw_breakpoint.h>
>  #include <linux/kallsyms.h>
>  #include <linux/list.h>
> @@ -15,11 +17,16 @@
>  #include <linux/perf_event.h>
>  #include <linux/rculist.h>
>  #include <linux/security.h>
> +#include <linux/spinlock.h>
>  #include <linux/tracepoint.h>
>  #include <linux/uaccess.h>
> +#include <linux/workqueue.h>
> +#include <linux/irq_work.h>
> +#include <linux/preempt.h>
>  
>  #include <asm/ptrace.h>
>  
> +#include "trace.h"
>  #include "trace_dynevent.h"
>  #include "trace_probe.h"
>  #include "trace_probe_kernel.h"
> @@ -50,6 +57,17 @@ struct trace_wprobe {
>  	int			len;
>  	int			type;
>  	const char		*symbol;
> +	raw_spinlock_t		lock;
> +	struct irq_work		irq_work;
> +	struct work_struct	work;
> +	atomic_t		missed;

Is `missed`  read somewhere?
I searched this file, only found set and inc.