[PATCH v3 2/2] power: supply: bq25630: Initialize hardware before exposing the power supply

bq25630_setup() resets the device, disables the watchdog and programs
the charge limits from the battery information. It runs at the end of
bq25630_probe(), that is after the power supply has been registered, so
the device is already exposed to the system while the hardware still
holds its power-on defaults.

power_supply_desc::init runs during registration, after the driver data
and the fwnode are available and before the device is added. Use it for
bq25630_setup() and drop the explicit call from bq25630_probe().

The callback is passed the power supply, so take the driver data from it
and use it for the battery information as well: data->psy is only
assigned once devm_power_supply_register() returns, which is after the
callback has run.

Signed-off-by: Linmao Li <[email protected]>
---
 drivers/power/supply/bq25630_charger.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/power/supply/bq25630_charger.c b/drivers/power/supply/bq25630_charger.c
index 54c62b7d6514..200f74f8eab6 100644
--- a/drivers/power/supply/bq25630_charger.c
+++ b/drivers/power/supply/bq25630_charger.c
@@ -665,8 +665,9 @@ static int bq25630_reset(struct bq25630_data *data)
 	return 0;
 }
 
-static int bq25630_setup(struct bq25630_data *data)
+static int bq25630_setup(struct power_supply *psy)
 {
+	struct bq25630_data *data = power_supply_get_drvdata(psy);
 	struct power_supply_battery_info *batinfo;
 	int ret;
 
@@ -684,7 +685,7 @@ static int bq25630_setup(struct bq25630_data *data)
 		return ret;
 	}
 
-	ret = power_supply_get_battery_info(data->psy, &batinfo);
+	ret = power_supply_get_battery_info(psy, &batinfo);
 	if (ret) {
 		dev_err(data->dev, "Could not get battery info (%d)\n", ret);
 		return ret;
@@ -753,7 +754,7 @@ static int bq25630_setup(struct bq25630_data *data)
 	}
 
 out_put_batinfo:
-	power_supply_put_battery_info(data->psy, batinfo);
+	power_supply_put_battery_info(psy, batinfo);
 
 	return ret;
 }
@@ -976,6 +977,7 @@ static const struct power_supply_desc bq25630_charger_psy_desc = {
 	.get_property = bq25630_charger_get_property,
 	.set_property = bq25630_charger_set_property,
 	.property_is_writeable = bq25630_charger_property_is_writeable,
+	.init = bq25630_setup,
 };
 
 static int bq25630_probe(struct i2c_client *client)
@@ -1048,10 +1050,6 @@ static int bq25630_probe(struct i2c_client *client)
 	if (ret)
 		return dev_err_probe(data->dev, ret, "Could not request IRQ\n");
 
-	ret = bq25630_setup(data);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 
-- 
2.25.1