[PATCH 5/5] power: supply: bq27xxx: bq27z561: fix invalid AverageEnergy address
Henrik Grimler <[email protected]>
| Newsgroups | org.kernel.vger.linux-pm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
bq27z561 currently uses the AveragePower reg, 0x22, for reading both
AveragePower and AvailableEnergy. The technical reference manual does
not mention AvailableEnergy, and it does not make sense to read a
cumulative, always positive, property like AvailableEnergy from a rate
property like AveragePower. Set REG_AE as invalid to fix it.
Fixes: 6f24ff97e323 ("power: supply: bq27xxx_battery: Add the BQ27Z561 Battery monitor")
Signed-off-by: Henrik Grimler <[email protected]>
---
drivers/power/supply/bq27xxx_battery.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 4985eb54090e..5aed8b24119b 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -496,7 +496,7 @@ static u8
[BQ27XXX_REG_RC] = 0x10,
[BQ27XXX_REG_FCC] = 0x12,
[BQ27XXX_REG_CYCT] = 0x2a,
- [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
[BQ27XXX_REG_SOC] = 0x2c,
[BQ27XXX_REG_DCAP] = 0x3c,
[BQ27XXX_REG_AP] = 0x22,
--
2.43.0