[PATCH v2 0/3] Enable icc-clk support for Qualcomm IPQ9650

On Qualcomm IPQ9650 platform the interconnect busses don't have separate
RPM / RPMh controls. Instead they require direct votes through the GCC.
To unify hardware descriptions (and software interfaces) between this
platform and other Qualcomm platforms, make GCC export corresponding NoC
clocks as interconnects.

Add the necessary bindings and the drivers changes for the same.

Signed-off-by: Kathiravan Thirumoorthy <[email protected]>
---
Changes in v2:
- Picked up the tags
- Detailed commit message for the dt-binding patch
- Link to v1: https://patch.msgid.link/[email protected]

To: Georgi Djakov <[email protected]>
To: Rob Herring <[email protected]>
To: Krzysztof Kozlowski <[email protected]>
To: Conor Dooley <[email protected]>
To: Bjorn Andersson <[email protected]>
To: Michael Turquette <[email protected]>
To: Stephen Boyd <[email protected]>
To: Brian Masney <[email protected]>
To: Konrad Dybcio <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]

---
Kathiravan Thirumoorthy (3):
      dt-bindings: interconnect: Add Qualcomm IPQ9650 support
      clk: qcom: ipq9650: Use icc-clk for enabling NoC related clocks
      arm64: dts: qcom: ipq9650: add interconnect-cells to GCC node

 arch/arm64/boot/dts/qcom/ipq9650.dtsi           |  1 +
 drivers/clk/qcom/gcc-ipq9650.c                  | 22 +++++++++++++++++++
 include/dt-bindings/interconnect/qcom,ipq9650.h | 28 +++++++++++++++++++++++++
 3 files changed, 51 insertions(+)
---
base-commit: 9eebf259d5352b87080d67758f483583d9e763d7
change-id: 20260519-ipq9650_icc-994280404adf

Best regards,
--  
Kathiravan Thirumoorthy <[email protected]>