Re: [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings
Krzysztof Kozlowski <[email protected]>
| Newsgroups | org.kernel.vger.linux-pm,org.infradead.lists.linux-amlogic,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <20260813-international-optimal-limpet-dfb06e@quoll> |
On Tue, Aug 11, 2026 at 08:37:43AM +0000, Xianwei Zhao wrote: > Document the thermal controller compatibles for the Amlogic A9 SoC. > > Describe the required "core" and "plck" clocks, add the optional > "amlogic,hw-reset-temp" property, and update the schema constraints for > A9-specific thermal controllers. > > Signed-off-by: Xianwei Zhao <[email protected]> > --- > .../bindings/thermal/amlogic,thermal.yaml | 28 +++++++++++++++++++++- > 1 file changed, 27 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > index 8cfa44dcda58..f73ee66bcc47 100644 > --- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > +++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml > @@ -23,6 +23,7 @@ properties: > - const: amlogic,g12a-thermal > - enum: > - amlogic,a1-cpu-thermal > + - amlogic,a9-thermal > - amlogic,t7-thermal > > reg: > @@ -32,7 +33,13 @@ properties: > maxItems: 1 > > clocks: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > + > + clock-names: > + items: > + - const: core > + - const: pclk > > power-domains: > maxItems: 1 > @@ -52,6 +59,10 @@ properties: > - description: phandle to the secure monitor > - description: sensor index to get specific calibration data > > + amlogic,hw-reset-temp: > + description: The hardware-controlled reset temperature value. > + $ref: /schemas/types.yaml#/definitions/uint32 Thermal zones define that, not custom properties. > + > required: > - compatible > - reg > @@ -73,6 +84,21 @@ allOf: > required: > - amlogic,secure-monitor > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - amlogic,a9-thermal Why is one clock valid as well for the new device? Best regards, Krzysztof