[PATCH 2/2] arm64: dts: qcom: sm6125: add TSENS and thermal zones

SM6125 has a TSENS v2 controller with 16 sensors, at 0x04411000 (TM) and
0x04410000 (SROT), with SPI 275 as "uplow" and SPI 190 as "critical".
The register and interrupt layout is identical to SM6115's, and being v2
the block self-calibrates, so it needs no qfprom nvmem cells and no new
driver code: it binds through the existing qcom,tsens-v2 fallback.

Add the controller and thermal zones for the 15 sensors that are used.
The sensor-to-zone mapping comes from the downstream device tree for
Xiaomi Mi A3 (laurel_sprout), cross-checked against mainline sm6115.dtsi,
which agrees on sensors 2, 3, 4, 13, 14 and 15. Sensor 5 is not
referenced downstream and is left out.

No cooling devices are wired up: SM6125 has no GPU node upstream yet, so
there is nothing to reference. The zones report temperature and carry
passive and critical trips; cooling maps can be added alongside the
consumers when those land.

Tested on Xiaomi Mi A3 (sm6125): tsens0 binds at 4411000.thermal-sensor
with no dmesg output, the thermal zone count goes from 5 to 20, and the
15 new die zones read 37.7-39.6 degrees Celsius at idle. Under a 660 s
glmark2-es2-drm soak the hottest zone reached 52.2 degrees Celsius, well
below its 85 degrees Celsius passive trip.

Both SM6125 boards still build with no new dtc warnings.

Signed-off-by: Roman Linev <[email protected]>
---
 arch/arm64/boot/dts/qcom/sm6125.dtsi | 299 +++++++++++++++++++++++++++
 1 file changed, 299 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 86de1560b..ed7fb5b75 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -719,6 +719,17 @@ spmi_bus: spmi@1c40000 {
 			#interrupt-cells = <4>;
 		};
 
+		tsens0: thermal-sensor@4411000 {
+			compatible = "qcom,sm6125-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
+			      <0x0 0x04410000 0x0 0x8>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
 			reg = <0x0 0x045f0000 0x0 0x7000>;
@@ -1634,6 +1645,294 @@ intc: interrupt-controller@f200000 {
 		};
 	};
 
+	thermal-zones {
+		/*
+		 * Sensor-to-zone mapping verified against the downstream
+		 * laurel_sprout device tree (tsens@4410000, sensors 0..15) and
+		 * cross-checked with mainline sm6115.dtsi, which agrees on
+		 * sensors 2, 3, 4, 13, 14 and 15. Sensor 5 is unused by the
+		 * downstream tree and is therefore left out.
+		 * cpu4..cpu7 are the downstream cpu-1-{0..3} (cluster 1) sensors.
+		 */
+		aoss0-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cdsp-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss2-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		modem0-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		display-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				trip-point0 {
+					temperature = <85000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				trip-point2 {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
-- 
2.55.0