[PATCH] power: supply: Fix power limit documentation

The documentation for the input current and voltage limits recommends
using those properties for problems that can be solved using a power
limit. This contradicts the recommendation to prefer input_power_limit
for such cases.

Similarly, the input_power_limit documentation recommends using the
current or voltage limits for problems that can be solved with a power
limit, which conveys the opposite of the intended meaning.

Fix the wording to clarify that input_power_limit should be preferred
whenever a power limit can address the problem, while current or
voltage limits should be used when it cannot.

Signed-off-by: Daniel Lezcano <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
---
 Documentation/ABI/testing/sysfs-class-power | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 32697b926cc8..f0ef87d365dd 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -600,8 +600,8 @@ Description:
 		supply. Normally this is configured based on the type of
 		connection made (e.g. A configured SDP should output a maximum
 		of 500mA so the input current limit is set to the same value).
-		Use preferably input_power_limit, and for problems that can be
-		solved using power limit use input_current_limit.
+		Use preferably input_power_limit, and for problems that can not
+		be solved using power limit use input_current_limit.
 
 		Access: Read, Write
 
@@ -618,8 +618,8 @@ Description:
 		input power to 5V when the screen is on to meet Google's skin
 		temperature targets). Note that this feature should not be
 		used for safety critical things.
-		Use preferably input_power_limit, and for problems that can be
-		solved using power limit use input_voltage_limit.
+		Use preferably input_power_limit, and for problems that can not
+		be solved using power limit use input_voltage_limit.
 
 		Access: Read, Write
 
@@ -633,7 +633,7 @@ Description:
 		in the supply. Normally this is configured based on
 		system-level knowledge or user input. Use preferably this
 		feature to limit the incoming power and use current/voltage
-		limit only for problems that can be solved using power limit.
+		limit only for problems that can not be solved using power limit.
 
 		Access: Read, Write
 
-- 
2.43.0