[PATCH] power: supply: bq2515x: Propagate charge-enable read errors

bq2515x_get_charge_disable() returns bool even though reading the
charger-disable state can fail. A negative error is therefore converted to
true, so POWER_SUPPLY_PROP_STATUS reports NOT_CHARGING with success instead
of propagating the failure. The GPIO read is not checked for errors either.

Return an int from the helper, check both reads, and only convert a valid
charger-disable state to the charging-status boolean.

Fixes: 44908459275e ("power: supply: bq25150 introduce the bq25150")
Signed-off-by: Linmao Li <[email protected]>
---
 drivers/power/supply/bq2515x_charger.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
index 0208358ebbe4c..c2b17562cf8bb 100644
--- a/drivers/power/supply/bq2515x_charger.c
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -420,7 +420,7 @@ static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
 							BQ2515X_ICHG_DIVISOR);
 }
 
-static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+static int bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
 {
 	int ret;
 	int ce_pin;
@@ -428,6 +428,8 @@ static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
 	int charger_disable;
 
 	ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+	if (ce_pin < 0)
+		return ce_pin;
 
 	ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
 	if (ret)
@@ -435,10 +437,7 @@ static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
 
 	charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
 
-	if (charger_disable || ce_pin)
-		return true;
-
-	return false;
+	return charger_disable || ce_pin;
 }
 
 static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
@@ -615,7 +614,11 @@ static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
 	else
 		status1_no_fault = false;
 
-	ce_status = (!bq2515x_get_charge_disable(bq2515x));
+	ret = bq2515x_get_charge_disable(bq2515x);
+	if (ret < 0)
+		return ret;
+
+	ce_status = !ret;
 
 	/*
 	 * If there are no faults and charging is enabled, then status is

base-commit: 2da28b059e0ddcd2e1956eeae383246207965573
-- 
2.25.1