Re: [PATCH v9 06/13] dt-bindings: power: rockchip: allow resets in a power domain node

On Mon, Aug 24, 2026 at 11:08:55PM +1200, Jiaxing Hu wrote:
> Some domains do not come up in a usable state on their own and need
> their resets cycled once power is on. The RK3576 NPU domains are one
> case: without it the first access after power-on takes an async SError.

Acked-by: Conor Dooley <[email protected]>
pw-bot: not-applicable

> 
> Signed-off-by: Jiaxing Hu <[email protected]>
> ---
>  .../bindings/power/rockchip,power-controller.yaml         | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> index b41db576f..83741f048 100644
> --- a/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> +++ b/Documentation/devicetree/bindings/power/rockchip,power-controller.yaml
> @@ -136,6 +136,13 @@ $defs:
>            A number of phandles to clocks that need to be enabled
>            while power domain switches state.
>  
> +      resets:
> +        maxItems: 1
> +        description:
> +          A phandle to a reset that needs to be cycled once the power domain has
> +          been switched on, for domains whose logic does not come up in a usable
> +          state by itself.
> +
>        domain-supply:
>          description: domain regulator supply.
>  
> @@ -216,6 +223,7 @@ examples:
>                      reg = <RK3399_PD_IEP>;
>                      clocks = <&cru ACLK_IEP>,
>                               <&cru HCLK_IEP>;
> +                    resets = <&cru SRST_A_IEP>;
>                      pm_qos = <&qos_iep>;
>                      #power-domain-cells = <0>;
>                  };
> -- 
> 2.43.0
>

-----BEGIN PGP SIGNATURE-----

iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaoxwMgAKCRB4tDGHoIJi
0kv+AP0WeUFb4dKPJSmjaR2SbLsqglAK44hwzBB4HyxQNKxIqgEA+h8O0hVC2kna
C84nBPE3JorbtfSL3jl4fvdc2oOxcAc=
=lpjX
-----END PGP SIGNATURE-----