[PATCH] dt-bindings: Drop redundant white-space around values in <>
Krzysztof Kozlowski <[email protected]>
| Newsgroups | org.kernel.vger.linux-pm,dev.linux.lists.imx,dev.linux.lists.mfd,org.freedesktop.lists.dri-devel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-gpio,org.kernel.vger.linux-i2c,org.kernel.vger.linux-iio,org.kernel.vger.linux-input,org.kernel.vger.linux-kernel,org.kernel.vger.linux-media,org.kernel.vger.linux-pci,org.kernel.vger.linux-spi,org.ozlabs.lists.linux-aspeed,org.ozlabs.lists.openbmc |
|---|---|
| Message-ID | <[email protected]> |
Correct a few white-space issues around <>, which will be flagged by dt-check-style. No functional changes. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- Rob, Can you take it directly? --- .../bindings/arm/arm,coresight-cti.yaml | 2 +- .../bindings/display/bridge/sil,sii9022.yaml | 2 +- .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 4 ++-- .../bindings/iio/light/upisemi,us5182.yaml | 2 +- .../bindings/input/matrix-keymap.yaml | 3 +-- .../devicetree/bindings/input/ti,tca8418.yaml | 21 +++++++++---------- .../bindings/media/nxp,imx8-jpeg.yaml | 4 ++-- .../devicetree/bindings/mfd/ti,tps65910.yaml | 2 +- .../bindings/pci/hisilicon,kirin-pcie.yaml | 4 ++-- .../pinctrl/sunplus,sp7021-pinctrl.yaml | 2 +- .../bindings/spi/aspeed,ast2600-fmc.yaml | 6 +++--- .../bindings/thermal/thermal-idle.yaml | 2 +- 12 files changed, 26 insertions(+), 28 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml index 949444aba1f8..f4101f94241a 100644 --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml @@ -308,7 +308,7 @@ examples: arm,trig-in-sigs = <0 1>; arm,trig-in-types = <PE_DBGTRIGGER PE_PMUIRQ>; - arm,trig-out-sigs = <0 1 2 >; + arm,trig-out-sigs = <0 1 2>; arm,trig-out-types = <PE_EDBGREQ PE_DBGRESTART PE_CTIIRQ>; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml index 17ea06719b56..b869552596f4 100644 --- a/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9022.yaml @@ -128,7 +128,7 @@ examples: cvcc12-supply = <&v1v2_hdmi>; #sound-dai-cells = <0>; - sil,i2s-data-lanes = < 0 1 2 >; + sil,i2s-data-lanes = <0 1 2>; clocks = <&mclk>; clock-names = "mclk"; diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml index 658ae92fa86d..edd561d9733a 100644 --- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml +++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml @@ -52,8 +52,8 @@ examples: axi_iic_0: i2c@40800000 { compatible = "xlnx,xps-iic-2.00.a"; clocks = <&clkc 15>; - interrupts = < 1 2 >; - reg = < 0x40800000 0x10000 >; + interrupts = <1 2>; + reg = <0x40800000 0x10000>; #size-cells = <0>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml index dd78abe0ec8d..979d7e782290 100644 --- a/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml +++ b/Documentation/devicetree/bindings/iio/light/upisemi,us5182.yaml @@ -69,7 +69,7 @@ examples: light-sensor@39 { compatible = "upisemi,usd5182"; reg = <0x39>; - upisemi,glass-coef = < 1000 >; + upisemi,glass-coef = <1000>; upisemi,dark-ths = /bits/ 16 <170 200 512 512 800 2000 4000 8000>; upisemi,upper-dark-gain = /bits/ 8 <0x00>; upisemi,lower-dark-gain = /bits/ 8 <0x16>; diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index ce910e4ac823..bef8f9813535 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -41,8 +41,7 @@ examples: - | keypad { /* ... */ - linux,keymap = < 0x00030012 - 0x0102003a >; + linux,keymap = <0x00030012 0x0102003a>; keypad,num-rows = <2>; keypad,num-columns = <8>; }; diff --git a/Documentation/devicetree/bindings/input/ti,tca8418.yaml b/Documentation/devicetree/bindings/input/ti,tca8418.yaml index 624a1830d0b0..a8897c5c4d9d 100644 --- a/Documentation/devicetree/bindings/input/ti,tca8418.yaml +++ b/Documentation/devicetree/bindings/input/ti,tca8418.yaml @@ -46,16 +46,15 @@ examples: interrupts = <11 IRQ_TYPE_EDGE_FALLING>; keypad,num-rows = <4>; keypad,num-columns = <4>; - linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0) - MATRIX_KEY(0x00, 0x00, BTN_1) - MATRIX_KEY(0x01, 0x01, BTN_2) - MATRIX_KEY(0x01, 0x00, BTN_3) - MATRIX_KEY(0x02, 0x00, BTN_4) - MATRIX_KEY(0x00, 0x03, BTN_5) - MATRIX_KEY(0x00, 0x02, BTN_6) - MATRIX_KEY(0x01, 0x03, BTN_7) - MATRIX_KEY(0x01, 0x02, BTN_8) - MATRIX_KEY(0x02, 0x02, BTN_9) - >; + linux,keymap = <MATRIX_KEY(0x00, 0x01, BTN_0) + MATRIX_KEY(0x00, 0x00, BTN_1) + MATRIX_KEY(0x01, 0x01, BTN_2) + MATRIX_KEY(0x01, 0x00, BTN_3) + MATRIX_KEY(0x02, 0x00, BTN_4) + MATRIX_KEY(0x00, 0x03, BTN_5) + MATRIX_KEY(0x00, 0x02, BTN_6) + MATRIX_KEY(0x01, 0x03, BTN_7) + MATRIX_KEY(0x01, 0x02, BTN_8) + MATRIX_KEY(0x02, 0x02, BTN_9)>; }; }; diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml index 6ba668aa633d..4727dd7040a8 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -95,7 +95,7 @@ examples: jpegdec: jpegdec@58400000 { compatible = "nxp,imx8qxp-jpgdec"; - reg = <0x58400000 0x00050000 >; + reg = <0x58400000 0x00050000>; clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, @@ -111,7 +111,7 @@ examples: jpegenc: jpegenc@58450000 { compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; - reg = <0x58450000 0x00050000 >; + reg = <0x58450000 0x00050000>; clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, <&img_jpeg__lpcg IMX_LPCG_CLK_4>; interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml index f1a76f88fc0c..f285e8cb29fb 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml @@ -208,7 +208,7 @@ examples: compatible = "ti,tps65910"; reg = <0x2d>; interrupt-parent = <&intc>; - interrupts = < 0 118 0x04 >; + interrupts = <0 118 0x04>; #gpio-cells = <2>; gpio-controller; diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml index e863519f3161..b6801057e31e 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -160,7 +160,7 @@ examples: reg = <0x2800 0 0 0 0>; compatible = "pciclass,0604"; device_type = "pci"; - reset-gpios = <&gpio27 4 0 >; + reset-gpios = <&gpio27 4 0>; #address-cells = <3>; #size-cells = <2>; ranges; @@ -170,7 +170,7 @@ examples: reg = <0x03800 0 0 0 0>; compatible = "pciclass,0604"; device_type = "pci"; - reset-gpios = <&gpio25 2 0 >; + reset-gpios = <&gpio25 2 0>; #address-cells = <3>; #size-cells = <2>; ranges; diff --git a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml index 94b868c7ceb1..0084350ec579 100644 --- a/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/sunplus,sp7021-pinctrl.yaml @@ -339,7 +339,7 @@ examples: sdcard-pins { function = "SD_CARD"; groups = "SD_CARD"; - sunplus,pins = < SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0) >; + sunplus,pins = <SPPCTL_IOPAD(91, SPPCTL_PCTL_G_GPIO, 0, 0)>; }; hdmi_A_tx1-pins { diff --git a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml index 80e542624cc6..ad830aebb798 100644 --- a/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml +++ b/Documentation/devicetree/bindings/spi/aspeed,ast2600-fmc.yaml @@ -62,21 +62,21 @@ examples: interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; flash@0 { - reg = < 0 >; + reg = <0>; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; spi-rx-bus-width = <2>; }; flash@1 { - reg = < 1 >; + reg = <1>; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; spi-rx-bus-width = <2>; }; flash@2 { - reg = < 2 >; + reg = <2>; compatible = "jedec,spi-nor"; spi-max-frequency = <50000000>; spi-rx-bus-width = <2>; diff --git a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml index 1b77d542a7b8..6b4b16580adf 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-idle.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-idle.yaml @@ -137,7 +137,7 @@ examples: cooling-maps { map0 { trip = <&cpu_alert1>; - cooling-device = <&cpu_b0_therm 0 15 >, + cooling-device = <&cpu_b0_therm 0 15>, <&cpu_b1_therm 0 15>; }; -- 2.53.0