Re: [PATCH v2 1/3] dt-bindings: interconnect: Add Qualcomm CAMNOC ICC binding

On Wed, Aug 19, 2026 at 12:32:09PM +0300, Atanas Filipov wrote:
> Add binding for the Qualcomm CAMNOC interconnect provider. CAMNOC is
> the internal AXI interconnect within the camera subsystem. Multiple
> sub-devices share CAM_CC_CAMNOC_AXI_CLK; the ICC provider aggregates
> their bandwidth votes and scales the clock accordingly, avoiding the
> last-writer-wins race from direct clk_set_rate() calls.
> 
> Signed-off-by: Atanas Filipov <[email protected]>
> ---
>  .../bindings/interconnect/qcom,camnoc.yaml    | 124 ++++++++++++++++++
>  .../dt-bindings/interconnect/qcom,camnoc.h    |  52 ++++++++
>  2 files changed, 176 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,camnoc.yaml
>  create mode 100644 include/dt-bindings/interconnect/qcom,camnoc.h
> 
> diff --git a/Documentation/devicetree/bindings/interconnect/qcom,camnoc.yaml b/Documentation/devicetree/bindings/interconnect/qcom,camnoc.yaml
> new file mode 100644
> index 000000000000..b2659db2cf27
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/qcom,camnoc.yaml

Filename must match compatible.

> @@ -0,0 +1,124 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interconnect/qcom,camnoc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Camera NOC (CAMNOC) Interconnect Provider
> +
> +maintainers:
> +  - Atanas Filipov <[email protected]>
> +
> +description:
> +  The Camera Network-on-Chip (CAMNOC) is the internal AXI interconnect
> +  within the Qualcomm camera subsystem. It arbitrates AXI bandwidth
> +  between camera sub-devices (IFE, JPEG, BPS, IPE, etc.) and the external
> +  memory interconnect. Multiple consumers may independently request
> +  bandwidth via icc_set_bw(); the CAMNOC ICC provider aggregates all active
> +  votes and scales CAM_CC_CAMNOC_AXI_CLK accordingly, avoiding the
> +  last-writer-wins race that arises when each consumer calls clk_set_rate()
> +  directly on the shared clock.
> +
> +  Each camera sub-device driver that shares the CAMNOC AXI clock should
> +  obtain an ICC path from its master port to SLAVE_CAMNOC_AXI and vote for
> +  bandwidth using the port IDs defined in
> +  include/dt-bindings/interconnect/qcom,camnoc.h.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,sm8250-cam-virt
> +
> +  clocks:
> +    items:
> +      - description: CAMNOC AXI clock
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +
> +  '#interconnect-cells':
> +    const: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - clock-names
> +  - '#interconnect-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,camcc-sm8250.h>
> +    #include <dt-bindings/interconnect/qcom,camnoc.h>
> +
> +    /* CAMNOC ICC provider node */

Drop, redundant.

> +    cam_virt: interconnect-cam-virt {

Drop unused label

> +        compatible = "qcom,sm8250-cam-virt";
> +        clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>;
> +        clock-names = "camnoc_axi";
> +        #interconnect-cells = <1>;
> +    };
> +
> +    /*
> +     * Simple consumer example: IFE sub-device voting for CAMNOC bandwidth


And what are the writing schema/bindings asking about consumers? Or
DTS101 slides? Look at other bindings instead of coming with own style.

Best regards,
Krzysztof