Re: [PATCH v14 0/5] Update designware pwm driver

> 
> There is already a patch [1] for the DesignWare PWM driver,
> which is posted by Ben and still under review.
> Based on this patch, this series is a continuation of [1]
> to add support for IP versions 2.11a and later, which
> includes support for "Pulse Width Modulation with 0%
> and 100% Duty Cycle".
> 
> Supported chips:
> ESWIN EIC7700 series SoC.
> 
> Test:
> Tested this patch on the Sifive HiFive Premier P550 (which uses the EIC7700
> SoC).
> 
> [1] https://lore.kernel.org/lkml/[email protected]/
> 
> Updates:
>   Changes in v14:
>   - YAML:
>     - Add 'Reviewed-by: Krzysztof Kozlowski <[email protected]>'
>       for patch 1.
>     - Drop minItems of reset-names property.
>     - Add the resets and reset-names properties and restrictions for
>       other compatible strings.
>   - Driver:
>     - Remove MODULE_ALIAS() (Sashiko review of v13).
>     - Update the commit message and comment for patch 5.
>       The exclusive reset references must be retained for the lifetime
>       of the timer: the hardware keeps running after init, and holding
>       the references keeps the resets deasserted, preventing other
>       devices on the bus from re-asserting them (Sashiko review of v13).
> 

Hi Uwe, Daniel, and Thomas,

Just a gentle reminder on this series. This patch series has received 
Reviewed-by and Acked-by tags from Krzysztof on the bindings portion. 
For the driver part, I have already responded to Sashiko's review 
comments and provided explanations.

Could you please help review the remaining patches? I would appreciate 
any further feedback or suggestions on how to proceed with this series.

Thanks for your time and attention.

Best regards,
Xuyang Dong