RE: [PATCH 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S

Biju Das <[email protected]>
Newsgroups org.kernel.vger.linux-renesas-soc,org.kernel.vger.linux-can,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <TY3PR01MB113465B4415A6F9A4665AA0E586F02@TY3PR01MB11346.jpnprd01.prod.outlook.com>
Hi Claudiu,

> -----Original Message-----
> From: Claudiu Beznea <[email protected]>
> Sent: 07 July 2026 11:24
> Subject: [PATCH 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S
> 
> From: Claudiu Beznea <[email protected]>
> 
> Hi,
> 
> Series adds CAN support for the Renesas RZ/G3S SoC. Along with it a typo fix patch was added on the CAN
> driver.
> 
> Thank you,
> Claudiu
> 
> Claudiu Beznea (8):
>   clk: r9a08g045-cpg: Add clocks and resets for CAN-FD
>   dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
>   can: rcar_canfd: Fix typos in macro names
>   can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
>   can: rcar_canfd: Do not set registers selecting the CAN mode
>   can: rcar_canfd: Add support for Renesas RZ/G3S
>   arm64: dts: renesas: r9a08g045: Add CAN-FD node
>   arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD
> 
>  .../bindings/net/can/renesas,rcar-canfd.yaml  | 17 +++++-
>  arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 39 +++++++++++++
>  .../boot/dts/renesas/rzg3s-smarc-switches.h   | 12 ++++
>  arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 46 +++++++++++++++
>  drivers/clk/renesas/r9a08g045-cpg.c           | 10 ++++
>  drivers/net/can/rcar/rcar_canfd.c             | 56 ++++++++++++++++---
>  6 files changed, 170 insertions(+), 10 deletions(-)
> 

For the series,

Reviewed-by: Biju Das <[email protected]>

Cheers,
Biju
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.