Re: [PATCH 08/16] drm: renesas: rz-du: Add RZ/G3L (R9A08G046) DU support

Hi Biju,
Thanks for your patch.

On Sat, Jul 04, 2026 at 10:34:18AM +0100, Biju wrote:
> From: Biju Das <[email protected]>
> 
> Add Display Unit support for the Renesas RZ/G3L SoC (R9A08G046). It is
> similar to the one found on RZ/G2L, but has LVDS support.
> 
> Signed-off-by: Biju Das <[email protected]>
> ---
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c  | 22 ++++++++++++++++++-
>  drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h  |  4 ++++
>  .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c  |  4 ++++
>  .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h  |  1 +
>  4 files changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> index 3d13f61d3c97..a8d841421a0b 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c
> @@ -55,6 +55,24 @@ static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = {
>  	.mode_clock_max = 83500,
>  };
>  
> +static const struct rzg2l_du_device_info rzg2l_du_r9a08g046_info = {
> +	.channels_mask = BIT(0),
> +	.routes = {
> +		[RZG2L_DU_OUTPUT_DSI0] = {
> +			.possible_outputs = BIT(0),
> +			.port = 0,
> +		},
> +		[RZG2L_DU_OUTPUT_DPAD0] = {
> +			.possible_outputs = BIT(0),
> +			.port = 1,
> +		},
> +		[RZG2L_DU_OUTPUT_LVDS0] = {
> +			.possible_outputs = BIT(0),
> +			.port = 2,
> +		},
> +	},
> +};
> +
>  static const struct rzg2l_du_device_info rzg2l_du_r9a09g057_info = {
>  	.channels_mask = BIT(0),
>  	.routes = {
> @@ -81,6 +99,7 @@ static const struct rzg2l_du_device_info rzg2l_du_r9a09g077_info = {
>  static const struct of_device_id rzg2l_du_of_table[] = {
>  	{ .compatible = "renesas,r9a07g043u-du", .data = &rzg2l_du_r9a07g043u_info },
>  	{ .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info },
> +	{ .compatible = "renesas,r9a08g046-du", .data = &rzg2l_du_r9a08g046_info },
>  	{ .compatible = "renesas,r9a09g057-du", .data = &rzg2l_du_r9a09g057_info },
>  	{ .compatible = "renesas,r9a09g077-du", .data = &rzg2l_du_r9a09g077_info },
>  	{ /* sentinel */ }
> @@ -92,7 +111,8 @@ const char *rzg2l_du_output_name(enum rzg2l_du_output output)
>  {
>  	static const char * const names[] = {
>  		[RZG2L_DU_OUTPUT_DSI0] = "DSI0",
> -		[RZG2L_DU_OUTPUT_DPAD0] = "DPAD0"
> +		[RZG2L_DU_OUTPUT_DPAD0] = "DPAD0",
> +		[RZG2L_DU_OUTPUT_LVDS0] = "LVDS0"
>  	};
>  
>  	if (output >= ARRAY_SIZE(names))
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> index baf076d69cda..0b86c5a01210 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h
> @@ -21,10 +21,12 @@ struct device;
>  struct drm_property;
>  
>  #define RZG2L_DU_FEATURE_DPIO_OE	BIT(0)	/* Has DPIO output enable control */
> +#define RZG2L_DU_FEATURE_SMUX2_DSI_CLK	BIT(1)	/* Per output mux */

This is not needed, we decide to move setting clock duty cycle handling into
encoder driver.

>  
>  enum rzg2l_du_output {
>  	RZG2L_DU_OUTPUT_DSI0,
>  	RZG2L_DU_OUTPUT_DPAD0,
> +	RZG2L_DU_OUTPUT_LVDS0,
>  	RZG2L_DU_OUTPUT_MAX,
>  };
>  
> @@ -61,6 +63,7 @@ struct rzg2l_du_device_info {
>  #define RZG2L_DU_MAX_CRTCS		1
>  #define RZG2L_DU_MAX_VSPS		1
>  #define RZG2L_DU_MAX_DSI		1
> +#define RZG2L_DU_MAX_LVDS		1

This is not used, please remove.

>  
>  struct rzg2l_du_device {
>  	struct device *dev;
> @@ -74,6 +77,7 @@ struct rzg2l_du_device {
>  	unsigned int num_crtcs;
>  
>  	struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS];
> +	struct drm_bridge *lvds[RZG2L_DU_MAX_LVDS];

Same here.

>  };
>  
>  static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> index f50d166b764f..7315d437c2ea 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c
> @@ -105,6 +105,9 @@ int rzg2l_du_encoder_init(struct rzg2l_du_device  *rcdu,
>  			return -EPROBE_DEFER;
>  	}
>  
> +	if (output == RZG2L_DU_OUTPUT_LVDS0)
> +		rcdu->lvds[output - RZG2L_DU_OUTPUT_LVDS0] = bridge;
> +

Same here.

>  	dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n",
>  		enc_node, rzg2l_du_output_name(output));
>  
> @@ -115,6 +118,7 @@ int rzg2l_du_encoder_init(struct rzg2l_du_device  *rcdu,
>  		return PTR_ERR(renc);
>  
>  	renc->output = output;
> +	renc->rcdu = rcdu;

Same.

>  	drm_encoder_helper_add(&renc->base, &rzg2l_du_encoder_helper_funcs);
>  
>  	/* Attach the bridge to the encoder. */
> diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> index 3e430c1f6132..8b048ca508be 100644
> --- a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h
> @@ -17,6 +17,7 @@ struct rzg2l_du_device;
>  
>  struct rzg2l_du_encoder {
>  	struct drm_encoder base;
> +	struct rzg2l_du_device *rcdu;

Same.

Thanks.

Kind Regards,
Tommaso

>  	enum rzg2l_du_output output;
>  };
>  
> -- 
> 2.43.0
>