[PATCH v3 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S

Claudiu Beznea <[email protected]>
Newsgroups org.kernel.vger.linux-renesas-soc,org.kernel.vger.linux-can,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
From: Claudiu Beznea <[email protected]>

Hi,

Series adds CAN support for the Renesas RZ/G3S SoC. Along with it a typo
fix patch was added on the CAN driver.

Thank you,
Claudiu

Changes in v3:
- addressed sashiko review comments

Changes in v2:
- collected tags
- addressed sashiko review comments

Claudiu Beznea (8):
  clk: r9a08g045-cpg: Add clocks and resets for CAN-FD
  dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
  can: rcar_canfd: Fix typos in macro names
  can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
  can: rcar_canfd: Do not set registers selecting the CAN mode
  can: rcar_canfd: Add support for Renesas RZ/G3S
  arm64: dts: renesas: r9a08g045: Add CAN-FD node
  arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD

 .../bindings/net/can/renesas,rcar-canfd.yaml  | 20 +++++-
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 39 +++++++++++
 .../boot/dts/renesas/rzg3s-smarc-switches.h   | 12 ++++
 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 46 +++++++++++++
 drivers/clk/renesas/r9a08g045-cpg.c           |  9 +++
 drivers/net/can/rcar/rcar_canfd.c             | 65 +++++++++++++++----
 6 files changed, 178 insertions(+), 13 deletions(-)

-- 
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.