[PATCH 2/7] memory: renesas-rpc-if: Move static bridge configurations out of dirmap hot paths

From: Lad Prabhakar <[email protected]>

Move the initialization of the xSPI Bridge Control Register 0
(XSPI_BMCTL0) and Bridge Configuration Register (XSPI_BMCFG) from the
dirmap read and write implementations into the hardware initialization
function.

The bridge configuration values remain unchanged across sequential dirmap
transfers. Keeping these regmap_update_bits() calls inside the hot paths
(xspi_dirmap_read_impl and xspi_dirmap_write) introduces significant
software overhead and redundant register locking cycles.

Statically setting CS0ACC to 0x3 during xspi_hw_init_impl() permanently
enables the memory area for both read and write operations.

Signed-off-by: Lad Prabhakar <[email protected]>
---
 drivers/memory/renesas-rpc-if.c | 26 ++++++++------------------
 1 file changed, 8 insertions(+), 18 deletions(-)

diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 104c28532c20..50294e5d2bf5 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -312,6 +312,14 @@ static int xspi_hw_init_impl(struct rpcif_priv *xspi, bool hyperflash)
 	regmap_update_bits(xspi->regmap, XSPI_INTE, XSPI_INTE_CMDCMPE,
 			   XSPI_INTE_CMDCMPE);
 
+	regmap_update_bits(xspi->regmap, XSPI_BMCTL0,
+			   XSPI_BMCTL0_CS0ACC(0xff), XSPI_BMCTL0_CS0ACC(0x03));
+
+	regmap_update_bits(xspi->regmap, XSPI_BMCFG,
+			   XSPI_BMCFG_WRMD | XSPI_BMCFG_MWRCOMB |
+			   XSPI_BMCFG_MWRSIZE(0xff) | XSPI_BMCFG_PREEN,
+			   0 | XSPI_BMCFG_MWRCOMB | XSPI_BMCFG_MWRSIZE(0x0f) |
+			   XSPI_BMCFG_PREEN);
 	return 0;
 }
 
@@ -869,15 +877,6 @@ static size_t xspi_dirmap_read_impl(struct rpcif_priv *xspi, u64 offs,
 			   XSPI_CMCFG1_RDCMD_UPPER_BYTE(xspi->command) |
 			   XSPI_CMCFG1_RDLATE(xspi->dummy));
 
-	regmap_update_bits(xspi->regmap, XSPI_BMCTL0, XSPI_BMCTL0_CS0ACC(0xff),
-			   XSPI_BMCTL0_CS0ACC(0x01));
-
-	regmap_update_bits(xspi->regmap, XSPI_BMCFG,
-			   XSPI_BMCFG_WRMD | XSPI_BMCFG_MWRCOMB |
-			   XSPI_BMCFG_MWRSIZE(0xff) | XSPI_BMCFG_PREEN,
-			   0 | XSPI_BMCFG_MWRCOMB | XSPI_BMCFG_MWRSIZE(0x0f) |
-			   XSPI_BMCFG_PREEN);
-
 	regmap_update_bits(xspi->regmap, XSPI_LIOCFGCS0, XSPI_LIOCFG_PRTMD(0x3ff),
 			   XSPI_LIOCFG_PRTMD(xspi->proto));
 
@@ -945,15 +944,6 @@ ssize_t xspi_dirmap_write(struct device *dev, u64 offs, size_t len, const void *
 			   XSPI_CMCFG2_WRCMD_UPPER(xspi->command) |
 			   XSPI_CMCFG2_WRLATE(xspi->dummy));
 
-	regmap_update_bits(xspi->regmap, XSPI_BMCTL0,
-			   XSPI_BMCTL0_CS0ACC(0xff), XSPI_BMCTL0_CS0ACC(0x03));
-
-	regmap_update_bits(xspi->regmap, XSPI_BMCFG,
-			   XSPI_BMCFG_WRMD | XSPI_BMCFG_MWRCOMB |
-			   XSPI_BMCFG_MWRSIZE(0xff) | XSPI_BMCFG_PREEN,
-			   0 | XSPI_BMCFG_MWRCOMB | XSPI_BMCFG_MWRSIZE(0x0f) |
-			   XSPI_BMCFG_PREEN);
-
 	regmap_update_bits(xspi->regmap, XSPI_LIOCFGCS0, XSPI_LIOCFG_PRTMD(0x3ff),
 			   XSPI_LIOCFG_PRTMD(xspi->proto));
 
-- 
2.54.0